The Scan page is used for "continuous" QR scanning and tracking status updates. With each scan, the select Status, ProcessorDivision, Comment, Hours, and Cost Type will be applied to the scanned QR code for the part, assembly, or package.  The Scan page for updating tracking statuses works with hand held scanner input devices connected to a computer logged into STRATUS as well as iPad and table cameras. 

Videos

STRATUS 09-26-19 Implementation Webinar - QR Code Workflows (30:08)

Video: Phone Status Updates (0:45)

Configuration and Use

To use the Scan page

1. Do one of the following to cconnect between STRATUS and the Scanner:
   1. Connect a wired or Bluetooth hand Handheld scanner to a device where you have logged into STRATUS and have opened the Scan page.
   2. Connect with a Bluetooth scanner tethered to phone or tablet as input device where you have logged into STRATUS and have opened the Scan page.
   3. Connect with an iPad or Tablet computer that has a built-in camera where you have logged into STRATUS and have opened the Scan page.
2. On the Scan page, set the Status drop-down option. The list of Processors Divisions will be filtered. Set the Processor Division drop-down option. Optionally enter a Comment, Hours, and Cost Type.
   
   
   
3. Select a Begin Scan option:
   1. If using option 1a, above, click the Begin Scan (Handheld) button.
   2. If using option 1b or 1c above, click the Begin Scan (Camera) button.
4. Scan the QR code.
   
   
   
5. The tracking table will populate. If you have selected a tracking status that is not applicable to the type of code scanned, an annoying error sound will clank and an “Unrecognized Code” error message will display. Otherwise, the tracking status will update in the grid.
   
   
   
6. Click the Change Status button to apply a different tracking status to the parts, assemblies, or packages to be scanned next.
7. Click the Clear button to clear all scanned rows on the Scan page. Click the Remove Item button to remove an individual item.

To access information about the scanned item

1. Once a QR code has been scanned, a row of information will display about the scanned part including the QR code.
   
2. Click the QR code or scan the QR code with a tablet or smart phone that is logged into STRATUS.  An item landing page similar to the following will display.
   
   
   
3. Here you have access to:
   1. The Tracking status history.
   2. The View Assembly where the Assemblies Viewer will display, or,
      
      
      
   3. The View Container button where the Containers page displays, or, 
      
      
      
   4. The View Location button where the item is Isolated in the Models Viewer with the “Show hidden parts shaded” checkbox checked.
      

QR Code Scanning in STRATUS

The graphic below shows the types of QR codes that can be generated and where they are scanned in STRATUS. See the STRATUS 09-26-19 Implementation Webinar (QR Code Workflows 30:08) for more information.