The Tracking tab displays the tracking status for the selected assembly and the ability to remove a tracking status.

Tracking Tab

The Tracking tab displays the tracking status for the selected assembly and the ability to remove a tracking status.

The Tracking tab displays the current tracking Status of the assembly and includes the User who updated the tracking status and the Date-Time stamp. For each tracking status the Comment, Division, and Hours can be updated (in-grid). In addition, a tracking status can be removed by clicking the Remove Selected Item button.

Tasks Tab

Task items are the instances of company-defined task definitions, which belong to task workflows optionally assigned to assemblies and parts. Each task item knows the assembly or part to which it belongs and holds a reference to the user and/or station with start and completed time stamps. The Task tab is used to manage part tasks for an assembly. It works in conjunction with Task Definitions. An operator can set the Use Hand Scanner option so that a hand scanner (rather than a keyboard/mouse) can be used to change task status and indicate completed work. A user must be associated with a project role that includes permission for Assemblies > Viewer > Tasks.

1. The Task Tab only displays.

   Image Removed

2. Click the Tasks tab to display:

   1. The list of tasks filtered based on the tasks that the assigned station (device) can perform.

   2. Tasks in sequential order with buttons for Start and Finish.

      1. Red – indicates the task has not been started.

      2. Blue – indicates the task has been started.

      3. Green – the task is done.

   3. The table which includes the part Number, the part Name, the Task definition name, and the QR code.

3. If the Use Hand Scanner button has been clicked, the operator can scan the QR Code to change the task status from Start to Finish. Later the operator can scan the QR Code to change the task status from Finish to Done which will result in the Update Tracking Status dialog. Note: The operator can also click the Start and Finish buttons to accomplish the same actions.

Features

Assembly View

90% of the time the default view in the Assemblies Viewer will display the needed information. In some cases, when a user selects a View that does not contain all the parts in the Assembly, a warning icon will display "View does not contain all parts in the Assembly". To resolve the issue, change to a view that includes all parts in the package.

Image Removed

In other cases, like risers, the default view may not include all of the model parts and will need to be overridden. Only a Project Admin can change and override a default view.

Image Removed

Image Removed

Image Removed

Filter Assemblies

Filter assemblies by Project, Model, Package, Division, and Status. 

Image Removed

• Package Filter - The Assemblies viewer includes a Package Filter/Dropdown.  When a Package is specified, the list of available Assemblies is filtered to only those included in the selected Package.  When ‘Unspecified’ is selected in the Package selector, all Assemblies will be listed.  

• Division Filter - When a Division filter is specified, the list of available Assemblies is filtered to only those assigned to the selected Division.

• Status Filter - When a Status filter is specified, the list of available Assemblies is filtered to only those in the selected Tracking Status.

• Note: If a filter does not meet the criteria for any assembly, a message window will display. For an assembly to display, the criteria for Division and Status must be met.

  Image Removed

Change Tracking Status - The tracking status can be changed for the entire spool or for a part within the spool.

To change the tracking status of the entire spool - Select the Tracking Status and click Apply. All parts in the assembly will be set to the selected tracking status.

Image Removed

To change the tracking status of individual parts

With the Parts tab selected, click the tracking status for the part and select the new status in the Specify Status dialog. Note: The selected report must include the tracking status field.

Image Removed

Then, using Display Modes, the Manually Cut items can be highlighted.

Image Removed

Note: When designing the report, there are multiple Tracking Status fields that are available. The field to use in the report is STRATUS.Part.TrackingStatus.

Image Removed

Rename Assembly

To rename an assembly within the assembly viewer, the assembly must be in a Tracking Status where Can Assemble is checked.

1. If the assembly is in a Tracking Status where Can Assemble is checked, then hovering over the assembly name will display “Edit Assembly Name”.

   Image Removed

   1. To edit the assembly name, click the assembly name. The Rename Assembly dialog will display.

      Image Removed

   2. Enter a unique name and click the green Save button.

      Image Removed

      1. If the new assembly name is not unique, the “Could Not Rename the Assembly” message will display.

         Image Removed

   3. If the new assembly name is unique, the name will change.

      Image Removed

   4. The assembly name will also change on the Assemblies > Dashboard and anywhere the name is referenced.

      Image Removed

2. If the assembly is not in a Tracking Status where Can Assemble is checked, then hovering over the assembly name will display “Name is locked based on Tracking Status”.

   Image Removed

How to Sort Assembly Parts Report by Number

To sort assembly parts report by number:

1. Configure the report under Admin > Company > Reports

2. Open the assembly report and check that the report includes:

   1. Property Name = Number

   2. Format = Integer.

      Image Removed

3. Open an assembly and select the report.

4. After the assembly parts display, click the Number column heading to sort and the parts will sort by number.

   Image Removed

Open Assembly by Scanning QR Code with the Tablet’s Camera

The Scan QR code with camera button on the Assemblies > Viewer page. Using the built-in camera on a tablet or phone as a scanner, a user can scan a QR code and the assembly will display. This will save clicks and the need to know the name of the project, model, package, or spool assembly.  Note: For iPad users, this feature only works when you have logged into STRATUS using the Safari web browser. 

1. Login to STRATUS on the tablet or phone.

2. Under Assemblies > Viewer, click the Scan QR code with camera button.
   Image Removed
   

3. The Capture an Image prompt will display asking if you “Would like to Access the Camera.” Click Allow.
   Image Removed
   

4. Point the camera at a STRATUS QR Code (Part or Assembly) either printed on a label or on the screen.
   Image Removed
   The assembly associated with the QR code will display on the device.

Videos

04/02/21 CSG Webinar: STRATUS In-Depth Series, The Assemblies Module

00:00 Introduction and Release Notes
11:00 Filter Spools
13:00 Can Assemble Tracking Status
13:30 Rename Assembly
13:55 Scan QR Code to display Assemblies Viewer page
15:00 Toggle Assemblies View for Tablets
16:20 Display Mode Tool
15:50 Grid Offset Measurement Tool
17:20 Explode Model Forge Tool
18:00 Numbering Tool
19:30 Annotation Tags Tool
22:15 Custom Notes
23:10 Attachments
24:30 Dimensioning Tool
31:00 Save Default Extensions Tool
32:30 Find Part
33:00 Spool Checker Tool

STRATUS 09-24-2020 What is the difference between the Place Linear Length Measurement tool and the Place Aligned Length Measurement tool? 

STRATUS 06-11-2020 Implementation Webinar - Spooling and the Assembly Viewer (32:44)