| Table of Contents | ||
|---|---|---|
|
v6.3.1 Minor Software Updates (8/18/23 - 11/2/23)
08/18/23 - Fixed Packages > STRATUS Sheets Report Fields Issue
Fixed a Packages > STRATUS Sheets issue where Report Fields did not report correctly.
08/18/23 - Fixed Issue with API: /v1/package/{orderID}/report/{reportID}
Fixed an issue with the API: /v1/package/{orderID}/report/{reportID}
08/18/23 - Added CSG Trainers to Help Page
Added Frank Scott and Trent Leinenbach as contacts to company help pages to which they are assigned.
08/18/23 - Fixed Project Role Issue
Fixed a Project Role issue where a user with only Assemblies > Viewer permissions received an error.
08/18/23 - Fixed Assemblies Viewer Issue Reloading the Model
Fixed Assemblies Viewer issue where after switching to a different assembly within the same View, the 3D viewer reloaded the model and then displayed the assembly. With this fix, when the assembly within the same View, it will display almost instantly. If the newly selected assembly uses a different View, then the model will need to be reloaded before the assembly displays. For example:
The SA-0001 Assembly displays in the 3D View.
Before this fix, after switching to the REV-001 Assembly the Powered by Autodesk logo would display indicating the model was being reloaded.
08/19/23 - Fixed Reference Points for Grid Offset Not Same for Identical Parts
Prior to fix:
After fix:
08/19/23 - Fixed Hanger Rod Points Not Reporting Consistently
With this fix ITM hangers with 2 rods will report the coordinates for C2 and C3 in the correct order.
08/19/23 - Fixed Assemblies > Viewer: Assembly Dropdown Sort Order
Fixed an Assemblies > Viewer issue where the Assembly dropdown sorted assemblies randomly (below) rather than in the correct sort order.
08/23/23 - Removed the STRATUS Addin Update Required Button
Removed the STRATUS Addin Up To Date and Update Required buttons (below). These notifications and actions can no longer be used with the new WinGet installation process. See the Installation of GTP Software on Windows article for more information.
08/25/23 - Fixed a ZPL Report Issue Not Running on Selected Parts
Fixed a ZPL report issue where running a ZPL report using the Action toolbar, the report runs for the whole model instead of the visible or selected parts.
08/25/23 - Fixed a ZPL Report Issue with STRATUS.Field.*
Fixed a ZPL Report issue where STRATUS.Field.* fields no longer work on ZPL report labels.
08/25/23 - Fixed an Issue With Authoring Software is Always Right for Naming and Numbering
Fixed an issue under Admin > Company > Naming and Numbering > Numbering Rules > Authoring Software is Always Right > Part Filter. With this fix, when an Authoring Software is Always Right rule that incorporates a STRATUS.Filter that looks for a specific “Service Type” and parts match the filters, then it will not get an item number. For example:
Create or edit a Filter that filters by ServiceType.
Add a Numbering Rule in the Authoring Software is Always Right section.
Add the Numbering Rule to a Numbering Scheme.
Prior to this fix, parts that should have been filtered out were receiving an item number.
With this fix, parts that should be filtered out are not receiving an item number.
08/25/23 - Fixed an Assemblies Dashboard Issue Where Updating Field A did not Update Field B
Fixed an Assemblies Dashboard issue where updating STRATUS.Field A did not update STRATUS.Field B. For example:
Configure 2 fields with one field referencing another field.
Add these fields to an Report where:
Item Type = Assembly
Assemblies Dashboard = checked
In the Assemblies Viewer, select the report. Enter a value in STRATUS.Field A. It should immediately update STRATUS.Field B.
08/30/23 - Fixed Issue Switching to a Project from an Assembly
Fixed an issue using the Project drop-down to switch to a different Project while in the Assemblies > Viewer. In this case, after the new Project loaded, “All Models” was selected in the Models drop-down. Since STRATUS would not know which model, package, or assembly to selected, this switch often ended up in an error. With this fix, when the user changes to a new Project, instead of selecting All Models, the first model (alphabetic) will be selected and if the model has an assembly, the first assembly (alphabetic) will be selected. If the model does not have an assembly, the Assemblies > Dashboard will display.
08/31/23 - Added Preview and Download All Attachments Options from Dashboards
Added the ability to download one or All attachments from all Dashboards (Packages, Assemblies, and Containers).
Attachments Note: The following file types can be attached:
.pdf, .txt, .csv, .gif, .png, .jpg, .jpeg, .xls, .xlsx, .xlsm, .doc, .docx, .maj, .mp4, .rej, .zip, .zpl
Date Attached - Displays the date the file was attached.
Preview (image file types only) - In the drop-down dialog, the following image file image file types will display for Preview:
.gif, .jpeg, .jpg, .png
Preview Attachment - Click the Preview Attachment button to display in a separate window the attachment preview for certain file types including:
.pcf, .pdf, .txt, .csv, .zpl, .gif, .jpeg, .jpg, .png
Preview is not available for: .xls, .xlsx, .xlsm, .doc, .docx, .maj, .mp4, .rej, .zip
Click the Download button to download the attachment.
Download Attachment
To download a single file attachment, click its corresponding Download Attachment button. The file will download to your default downloads folder. There won’t be any prompt or confirmation. The file name syntax will be the:
Name of the attachment (Ex. REV-FR-0003)
Date downloaded (Ex. 08-28-2023)
Time stamp to make each download unique (Ex. 21-33-40)
File type (Ex. pcf).
Download All - Click the Download All button to download each individual file attachments associated with the selected Package, Assembly, or Container to your default download folder. The name of each file will follow the syntax as if the individual file’s Download Attachment (above) button was clicked.
Download All (ZIP) - To download a single zip file with all of the attachments associated with the selected Package, Assembly, or Container to your default download folder, click the Download All (ZIP) button. The file name syntax will be the:
Name
Package - Name of the first file in the attachment list
Assembly - Name of the first file in the attachment list
Container - Name of the Container
Attachments
Date downloaded (Ex. 08-28-2023)
Time stamp to make each download unique (Ex. 21-29-21)
File type (Ex. .zip)
09/05/23 - Fixed Sum Issue on Report
Fixed an issue where on the Packages > Viewer > Parts table where the report summed FeetInchFraction, but did not correctly calculate the fractions.
The Report had the following settings:
Merge Like Values = Yes
Aggregate = Sum
Format = FeetInchFraction
Precision = 2
The report now displays the correct value including the fraction.
09/06/23 - Fixed a Lighting Publish Issue
Fixed a Lighting publish issue.
09/07/23 - Fixed Assembly Parts Not Displaying in Non-Default View
When a model is be published with multiple views, and one of them is determined by the Autodesk viewer to be the default. The issue that was fixes occurred when an assembly was created in a non-default View, the part would not display in the Assemblies > Viewer. For example:
The default view is Full Model
User A with permission (Ex. Project Admin) to change Views, changed the View (Ex. Top Half) and created an assembly.
User B, opened the assembly and the default View was used instead of the View User A had created the assembly in so the parts were filtered out.
With this fix the View correctly changed for the User B when the Assemblies > Viewer is opened.
09/21/23 - Added Division Drop-down during Package Creation
Added to the Models > Viewer > Actions > Packages dialog the Division drop-down.
09/21/23 - Fixed Assemblies > Viewer Annotation Issue
Fixed an issue in the Assemblies > Viewer where after adding an Annotation Tag in Assembly A, then switching to Assembly B, the Annotation tag remained in the view. As a result, it is no longer necessary to refresh the Assembly B Viewer page to remove Annotation Tags placed on Assembly A.
09/21/23 - Fixed Assemblies > Viewer > STRATUS Sheet Property Display
Fixed an issue displaying the STRATUS.Assembly.TrackingStatusLogDivision property on the Assemblies > Viewer > STRATUS Sheet.
09/21/23 - Updated ZPL Report Availability
Under Admin > Company > Reports, ZPL reports can be created when the report Format is ZPL. The report will display in any of the checked Viewers (Assembly, Model, Package). For example, the Package ZPL report will be available in the Models > Viewer under Actions > Reports.
09/21/23 - Fixed a Dimensioning Issue
Fixed an issue under Assemblies > Viewer > Dimensioning, where dimensioning worked within Assembly A, but after switching to Assembly B, the snap point nodes did not display.
09/21/23 - Updated Extract Geometry
For STRATUS Flex users, on the Models > Dashboard, updated the Extract Geometry feature to extract models published in with the STRATUS Addin in 2022 or more recent versions. To use this feature:
Go to the Models > Dashboard.
Click the Extract Geometry button.
The message will display.
Click Ok.
The icon will change to Processing.
Refresh the page. When complete the Completed icon will display.
If the process failed, the Failed, Retry? icon will display. Check that the model was published in 2022 or more recently. If the issues persists, submit at Service Desk ticket.
09/21/23 - Updated Top Navigation to Specify the Package
With this update, STRATUS will recognize when users are working with a package and store the last opened or refreshed package as the active package. As a result, when the user clicks a link to an assembly, the active package will carryover and be selected in the Package drop-down. Otherwise, the Package will be set to Unspecified.
For example:
The user is working in this Package and can click any of these assembly links.
The assembly will display in the Assemblies > Viewer and the Package drop-down will carryover.
09/21/23 - Fixed an Issue Automatically Generating Package Reports
Fixed an issue automatically generating package reports. Known Issue: There is a known issue automatically generating Package Reports where the selected report’s Item Type is Master. This will be fixed in a future release.
See the article Generate on Tracking Status (Report) for more information.
10/02/23 - Fixed an Issue with Tracking Status “Applies to” (Part, Assembly, Package) Setting
Fixed an issue under Admin > Company > Tracking Statuses where the Applies to (Part, Assembly, Package) was not displayed or hidden in one of the Viewers or Dashboards when changing tracking status. The Applies to settings tell STRATUS that a particular tracking status can or can't be applied to a Part, Assembly, or Package.
10/02/23 - Fixed an Issue where Advanced Estimating Values Did Not Populate a New Package
Under Admin > Company > Package Categories, administrators can configure Advanced Estimating for Office, Purchasing, Shop, Field, and other User Data fields. While a package is being created, these values change dynamically as parts are selected for the package. An issue was fixed where these values did not populate the while the package was being created. See the Advanced Estimating article for more information.
10/02/23 - Fixed an Issue Displaying Assemblies Alphanumerically when Package Switched
Fixed an issue displaying assemblies alphanumerically when the Package is switched in the Assemblies > Viewer. In this example, after the Package was switched, 001 should display, not 002. See the Open Assembly article for more information.
10/02/23 - Fixed an Issue Limiting Assembly Drop-down to Selected Package
Fixed an issue where the Assembly drop-down displayed all packages and assemblies even when a specific package had been selected.
In the example below the issue is that a Package is selected yet all assemblies from different packages display.
With this fix, the list of assemblies are limited to those within the selected Package.
10/02/23 - Fixed an Issue with Remembering Show Selection
Fixed an issue on the Packages > Dashboard and Assemblies > Dashboard with remembering the user’s Show selection.
10/02/23 - Fixed an Issue for MAJ Part QR Code Links
Fixed an issue for MAJ parts that contain links to the Part, Assembly, and Package that opens the QR Code for the link clicked.
For example:
This newly generated MAJ opened in CAMduct consistently displays:
Links #1 = Part QR Code
Links #2 = Assembly QR Code
Links #3 = Package QR Code
When clicked the QR Code Scanned page will display.
10/11/23 - Fixed a Mobile Dropdown Scrolling Issue
Fixed a mobile (tables or ipad) issue scrolling in the Package and Assembly drop-downs in the viewers.
10/11/23 - Added API Parameter excludeNullAndEmpty
Added to the OpenAPI the optional excludeNullAndEmpty parameter to the following calls which provides a nice performance boost for API customers.
GET /v1/assembly/{id}/parts
GET /v1/model/{id}/parts
GET /v2/package/{id}/parts
GET /v1/part
GET /v1/part/{qrcode}
GET /v2/part/{id}
10/16/23 - Fixed Size of GTP Quick Pass QR Code
Increased the size of the GTP Quick Pass QR Code.
10/19/23 - Fixed STRATUS.Part.GridOffset Value Display
Fixed an issue for CADmep models where STRATUS.Part.GridOffset values did not display for CID 838. Below the values correctly display.
10/23/23 - Fixed Date Picker on Assemblies Viewer
Fixed an issue on the Assemblies Viewer where the Date Picker did not display when a Date field was used in either the Report Field or the Field.
The date field can be referenced in 2 ways:
The date field can be referenced in the Report Field Format.
Configure Report and Report Field where:
Item Type = Part
Assembly Viewer = Checked
Format = Date
Configure referenced Field (Ex. STRATUS.Field.DateTest) where:
Data Type = String
Expression = References one of the assembly’s part properties (Ex. EquipmentTag).
The date field can be referenced in the Field Data Type.
Configure Report and Report Field where:
Item Type = Part
Assembly Viewer = Checked
Format = String
Configure referenced Field (Ex. STRATUS.Field.DateTest) where:
Data Type = Date
Expression = References one of the assembly’s part properties (Ex. EquipmentTag).
For either configuration option, run the Report. The field is editable and pops up the date picker.
10/23/23 - Fixed a Rounding Issue Calculating a Field Expression Value
Fixed an issue rounding a calculated field expression value in a report. In the example below, the field had previously displayed 8.00 but now correctly displays 7.90.
To update any report data on the Packages Dashboard or Assemblies Dashboard, click the Clear Cached Calculated Field Values and Reload Data Tablebutton.
10/23/23 - Fixed Send to Tool Issue in Assemblies Viewer
Fixed an issue in the Assemblies > Viewer > Parts where the Send to Tool button was missing. This issue only occurred when one or more report fields had the Hidden checkbox checked.
Not Yet Released - Fixed Editable Field in Assemblies Viewer Parts Table
Fixed an Assemblies Viewer Parts table issue where an editable Field that had a semi-colon list of possible values was not editable.
Below is an example of this type of field.
The field is editable and includes the Possible Values in the Assemblies Viewer Parts table.
See the Possible Values section of the Fields (Admin) article for more information.
Not Yet Released - Fixed Issue Generating MAJ When Multiple ESJ Files Exist
Fixed an issue generating a MAJ file with the correct parts when multiple ESJ files exist. This issue was resolved by using the last modified ESJ file.
Not Yet Released - Added Omit Page If Report(s) Are Empty Option
Added to Admin > Company > Templates, the Omit page if Report(s) are empty option. With this option checked, if any reports on the page include content, then the page and report will display, if not the page will be omitted and not display.
In this example,
Template Setup = CSG _ MEP _ Hanger Fabrication - This template has 2 pages. Each page includes a report and under Page Properties the Omit page if Report(s) are empty option. By default the Omit page if Report(s) are empty option is unchecked.
Unchecked - Omit page if Report(s) are empty - When the Omit page if Report(s) are empty option is unchecked, the STRATUS Sheet will display a page regardless if report data if it exists.
Page 1 - includes a secondary report for Single Rod hangers which are included in the selected package.
Page 2 - includes a secondary report for Trapeze hangers which are not included in the selected package. However, since Omit page if Report(s) are empty option is unchecked, the page still displays.
Checked - Omit page if Report(s) are empty - When the Omit page if Report(s) are empty option is checked, the STRATUS Sheet will display a page only if report data if it exists (Ex. Page 1), but not if no data exists (Ex. Page 2).
Page 1 - includes a secondary report for Single Rod hangers which are included in the selected package.
Report Display in Packages > Viewer > STRATUS Sheet - This package has Single Rod hangers, not Trapeze hangers.
Unchecked - Omit page if Report(s) are empty - When the Omit page if Report(s) are empty option is unchecked,
Page 1 includes a secondary report for Single Rod hangers, therefore the report data displays.
Page 2 includes a secondary report for Trapeze hangers, therefore there is no report data and the page is blank.
This Package includes clevis hangers but not trapeze hangers, but
Unchecked - When Omit page if Report(s) are empty is unchecked