RazorGage has TWO kinds of RazorGage. If you get an RG3, you can communicate with Stratus through an experimental version of the WorkstationApp. If you have the older RazorGage, you will need to see the page on RGST: https://gtpservices.atlassian.net/wiki/x/VoIFaQ

...

Assign a Port to RazorGage/RG3

To assign a port to RG3one of the two ports created above to RG3. There are two ways, one through RG3, and if that fails, we need to notepad and edit a setting file. Instructions for both methods follow.

Open RG3, click on Settings, enter the password (5239 in the default case), then go to the Remote Control tab, where you will be able to pick the COM4. Again, this is COM4 in our case, because COM4 is one of the ports added when we added our new cable – see above steps:

...

If the above steps did not work, then you can open Windows File explorer and go to:

C:\RG3\Parameters

From there, right-click on “MachineParameters.json” and edit with Notepad.

...