STRATUS / PypeServer .PSVR Output Workflow

A .PSVR file can be generated and exported from STRATUS and imported into PypeServer.  PSVR works from the Package's Cut Lists tab where a separate cut list PSVR file is generated for each material-diameter combination. Configuration of PSVR output relies on Admin > Company > Pipe Cuts settings, where the company's o-let hole sizes, connector bevel angles, etc. are entered.  PSVR cut list files are sent to a station configured for the PypeServer tool. See the Pipe Cuts (Admin) article for more infomation. The Pipe Cuts page describes the best practice configuration for AutoCAD and Revit and the Pipe Cuts configuration within STRATUS. Pipe Cuts configuration is needed because it is difficult for PypeServer to determine whether a connector needs to be a bevel or plain angle cut. The process of downloading PSVR cut list files happens in the Shops > Station view. See the Shops Dashboard article for more information.

Note: PCF output also works with PypeServer, but will always be a manual file export and relies on setting managed on the PypeServer side.

Configure a Tool

Before a .PSVR file can be generated, configure a PypeServer tool under Admin > Company > Tools. See the Tools article for more information. Below is an example. 

Configure a Station

Before a .PSVR file can be generated, configure a Station that will run the cutting tool under Admin > Company > Stations. See the Stations article for more information. Below is an example. 

Configure Pipe Cuts

Configuration of PSVR output relies on Admin > Company > Pipe Cuts settings, where the company's o-let hole sizes, connector bevel angles, etc. are entered. See the Pipe Cuts article for more information.

Configure Cut List Mappings 

A Cut List Mappings for each Part Template must be configured to tell STRATUS which data fields to use.

To configure a Cut List Mapping: 

1. Got to Admin > Company > Part Templates. 
2. In the Parts section, select or search for Part Template Name.  
   1. Hint:  To determine a Part Template Name, in any STRATUS viewer, open the Properties tool, select the part, and then locate the Template Name.
      
      
      
3. Select the Part Template and then click the Cut List Mappings tab. 
   
   
   
4. In the Consider for Multi-Axis Cut Lists section, select a part parameter from your database that contains the data for each field. The parameters that need to be selected will vary depending the type of part selected. 
   1. Straight Pipe fields:
      
      
      
   2. Saddle fields:
      
      
      
   3. Revit Family Content - Pipes Pipe Type (No Fabrication Content) 
      Create Project Parameters (Required)
      STRAUTS uses the Revit API to extract data from the model. Diameter and Pipe End Connector parameters must be defined in Revit as a project parameter so that the data can be injected into the part. The project parameter tells STRATUS where to look for the parameter in your model.
      
      
      1. STRATUS uses the Inside and Outside Diameter.
         
         
         
      2. Companies need to map a project parameter to the Segment and Sizes.
         
         
         
   4. Revit Family Content – Shaped Nipple 
      The Shaped Nipple is similar to the Pipes Pipe Type but a Olet Type also needs to be selected.
      
      

Generate a .PSVR output file

To generate a .PSVR file: 

1. Open a package that includes straight pipe along with Connectors, Saddles, or Olets. 
2. With the package open, click the Cut Lists tab.  
3. With To enable the Generate Cut List button, check that the package is set for with a “Can Cut List” tracking status, click . See the Tracking Statuses (Admin) article for more information.
4. Click the Generate Cut List button.  
5. The cut list will display.
   
   
   
   1. For each cut list row that will be sent to a PypeServer cutting machine, select the correct Station.  See the Station (Admin) article for more information.
   2. Check the rows that will be sent to the station. 
   3. Click the Send Cut List to Station button. 
   4. Click OK on the Send Cut Lists dialog box.
      
      
6. Cut List files are organized under the Shops tab.  
7. On the Shops > Dashboard, select the Shop. A list of Stations for the Shop display. 
   
   
   
8. Click the Station name and a list of requested cut lists will display.
9. Click the Send to Tool button associated with the Cut List. A PSVR file will be created for each material-diameter combination.  
   
   
   
10. The .PSVR file will be a downloaded by your web browswer.
    
    How to use the .PSVR file
11. Locate the downloaded .PSVR file and save it to a location that can be used by the PypeServer software. 
12. The CAD department loads the .PSVR file into the PypeServer software. 
13. PypeServer’s powerful tools can be used to prepare the pipe to be cut. 
14. Auto-nest the cut list and PypeServer will optimize nesting. 
15. When ready to cut, Load to Machine and enter the Heat number. 
16. The pipe staging tool instructs the operator to Align the torch centerline. 
17. And when ready, the operator starts the cutting tool at the gantry. 

STRATUS OpenAPI

For information about how to integrate the STRATUS OpenAPI with PypeServer, please contact the STRATUS Service Desk.

Video

STRATUS 01-22-20 Why Measure? Just Cut Using STRATUS OpenAPI and PypeServer (Todd Liebbe, Darren Young, Kelly Dillon 36:53)