Printer Model

Label Width

DPI

Notes

ZD421 Desktop Printer

Direct Thermal: 0.585 in./15 mm to 4.25 in./108 mm
Thermal Transfer Roll: 0.585 in./15 mm to 4.41 in./ 112 mm
Thermal Transfer Cartridge: 0.585 in./15 mm to 4.65 in./118 mm

203; 300

Simple, Cheaper than others

No Screen version of ZD621

ZD621 Desktop Printer

Direct Thermal: 0.585 in./15 mm to 4.25 in./108 mm
Thermal Transfer: 0.585 in./15 mm to 4.65 in./118 mm

203; 300

Has a Screen for modifying printer settings.

ZT610 Industrial Printer

Direct Thermal:
8.7 in./ 221 mm L x 7.0 in./177 mmW x 5.9 in./151 mm
Thermal Transfer:
10.5 in./267 mm L x 8.0 in./202 mm W x 7.5 in./ 192 mm H

203; 300; 600

Direct Thermal Labels

Printer(s)

Durability

Notes

Z-Select 4000D
(Spec. Sheet)

ZD421d;
ZD621d;
ZD421t;
ZD621t;
ZT610

Medium

No direct exposure to welding, sunlight or other UV light sources

Scratch Resistant; can be torn

Z-Select 2000D
(Spec. Sheet)

ZD421d;
ZD621d;
ZD421t;
ZD621t;
ZT610

Low

No direct exposure to welding, sunlight or other UV light sources

Label can be easily damaged in a shop environment

Thermal Transfer Labels	Printer(s)	Ribbon	Durability	Notes
PolyPro 3000T Matte (Spec. Sheet)	ZD421t; ZD621t; ZT610	6100 Wax/Resin (Matte Facestock) 3200 Wax/Resin (Matte Facestock) 6200 Resin (Gloss and Matte Facestocks)	High	Hard to tear/scratch
Z-Ultimate 3000T (Spec. Sheet)	ZD421t; ZD621t; ZT610	5095 Resin 5100 Resin 6200 Resin	Extreme	Hardest to tear/scratch
Z-Ultimate 4000T (Spec. Sheet)	ZD421t; ZD621t; ZT610	5095 Resin 5100 Resin 6200 Resin	Extreme	Hardest to tear/scratch

Label Type

Picture Of Label

Label Report and Fields

ZPL Code

Pipe Label

Image Modified

4” x 2” Label

Expand

title	203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0

^FO30,15
^FDGTP

STRATUS^FS

Stratus^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FX COMMENT: Position at 140, 10 on label and print item number ^FS
^FO30,80
^FB770,16,0,L
^FDPackage Name: {{

STRATUS

Stratus.Part.PackageName}}

^FS^FO30,110
^FDAssembly

\&

Assembly Name: {{

STRATUS

Stratus.Part.AssemblyName}}

^FS^FO30,140
^FDSize

\&

Size: {{Size}}

^FS^FO30,170
^FDMaterial

\&

Material: {{Material}}

^FS^FO30,200
^FDLength

\&

Length: {{

STRATUS

Stratus.Part.CutLengthFeetAndInches}}

^FS^FO30,230
^FDItem

\&

Item #: {{

STRATUS

Stratus.Part.Number}}

^FS^FO30,260
^FDEnd

\&

End 1: {{C1}}

^FS^FO30,290
^FDEnd

\&

End 2: {{C2}}

^FS^FO30,320
^FB550,16,0,L
^FDHole

\&

Hole Info:\&{{

STRATUS

Stratus.Field.Hole info for ZPL Label}}^FS

^FX COMMENT: Position at 15, 10 on label and print QR code ^FS, USE M as Standard Quality QR Code
^FO590,180
^BQN,2,7^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Pipe Label

Image Modified

4” x 2” Label

Expand

title	203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size ^FS
^CF0,60

^FWR ^FX COMMENT: Rotate all following fields 90 degrees clockwise ^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0

^FO730,30
^FDGTP

STRATUS^FS

Stratus^FS

^CF0,30

^FO700,30
^FDPkg: {{

STRATUS

Stratus.Part.PackageName}}^FS

^FO670,30
^FDAssembly: {{

STRATUS

Stratus.Part.AssemblyName}}^FS

^FO640,30
^FDSize: {{Size}}^FS

^FO610,30
^FDMaterial: {{Material}}^FS

^FO580,30
^FDLength: {{

STRATUS

Stratus.Part.CutLengthFeetAndInches}}^FS

^FO550,30
^FDItem #: {{

STRATUS

Stratus.Part.Number}}^FS

^FO520,30
^FDEnd 1: {{C1}}^FS

^FO490,30
^FDEnd 2: {{C2}}^FS

^FO10,30
^FB400,16,0,L
^FD{{

STRATUS

Stratus.Field.Holeinfo for ZPL Label}}^FS

^FX COMMENT: Position for QR code and rotate it 90 degrees ^FS, USE M as Standard Quality QR Code
^FO20,20
^BQN,2,7R^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0
^FWN

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Hanger Label

Image Modified

4” x 6” Label

Expand

title	203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28
^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWN

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0

^FX COMMENT: Set default font size ^FS
^CF0,80

^FX COMMENT: At 80 font this is more or less centered ^FS
^FO30,569
^FD{{

STRATUS

Stratus.Part.ProjectNumber}} {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,60

^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWR

^FO720,150
^FDAssembly^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO625,10
^GB75,500,6,B

^FS
^FO426,10
^GB205,500,6,B

^FS
^FO226,10
^GB205,500,6,B

^FX COMMENT: Set default font size ^FS
^CF0,50

^FO630,20
^FDNumber: {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FO140,20
^FB500,10,20,L
^FD{{

STRATUS

Stratus.Field.Frank Hanger Assembly Info}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,60

^FO720,775
^FDInstallation^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO625,700
^GB75,500,6,B

^FS
^FO426,700
^GB205,500,6,B

^FS
^FO226,700
^GB205,500,6,B

^FX COMMENT: Set default font size ^FS
^CF0,50

^FO630,720
^FDNumber: {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FO140,720
^FB460,10,20,R
^FD{{

STRATUS

Stratus.Field.Frank Hanger Install Info}}^FS

^FX COMMENT: Position at 20,200 on label and print QR code ^FS, USE H as High Quality QR Code
^FO20,200
^BQN,2,6^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: Position at 20, 800 on label and print QR code ^FS, USE H as High Quality QR Code
^FO20,800
^BQN,2,6^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift entire label ^FS
^LH0,0
^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWN

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Decoiled Straights

Image Modified

4” x 3” Label

Expand

title	203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size for header ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift the entire label ^FS
^LH0,0

^FO30,15
^FDGTP

STRATUS^FS

Stratus^FS

^FX COMMENT: Set default font size for section headers ^FS
^CF0,50

^FO30,80
^FDDecoiled Straight^FS

^FX COMMENT: Set default font size for body text ^FS
^CF0,40

^FO30,130
^FDPackage Name: {{

STRATUS

Stratus.Part.PackageName}}^FS

^FO30,170
^FDAssembly Name: {{

STRATUS

Stratus.Part.AssemblyName}}^FS

^FO30,210
^FDProject: {{

STRATUS

Stratus.Part.ProjectNumber}} - {{

STRATUS

Stratus.Part.ProjectName}}^FS

^FO30,270
^FDSize: {{Size}}^FS

^FO30,310
^FDMaterial: {{Material}} ({{MaterialGauge}})^FS

^FO30,350
^FDLength: {{

STRATUS

Stratus.Part.CutLengthFeetAndInches}}^FS

^FO30,390
^FDItem #: {{

STRATUS

Stratus.Part.Number}}^FS

^FO30,437
^FDEnd 1: {{C1}}^FS

^FO30,477
^FDEnd 2: {{C2}}^FS

^FO30,517
^FDSeam 1: {{S1}}^FS

^FO30,557
^FDSeam 2: {{S2}}^FS

^FX COMMENT: Set default font size for QR code section ^FS
^CF0,30

^FO550,350
^BQN,2,7^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO20,425
^GB310,180,6,B

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift the entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Spiral Straights

Image Modified

4” x 3” Label

Expand

title	203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size for header ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift the entire label ^FS
^LH0,0

^FO30,15
^FDGTP

STRATUS^FS

Stratus^FS

^FX COMMENT: Set default font size for section headers ^FS
^CF0,50

^FO30,80
^FDSpiral Straight^FS

^FX COMMENT: Set default font size for body text ^FS
^CF0,40

^FO30,130
^FDPackage Name: {{

STRATUS

Stratus.Part.PackageName}}^FS

^FO30,170
^FDAssembly Name: {{

STRATUS

Stratus.Part.AssemblyName}}^FS

^FO30,210
^FDProject: {{

STRATUS

Stratus.Part.ProjectNumber}} - {{

STRATUS

Stratus.Part.ProjectName}}^FS

^FO30,270
^FDSize: {{Size}}^FS

^FO30,310
^FDMaterial: {{Material}} ({{MaterialGauge}})^FS

^FO30,350
^FDLength: {{

STRATUS

Stratus.Part.CutLengthFeetAndInches}}^FS

^FO30,390
^FDItem #: {{

STRATUS

Stratus.Part.Number}}^FS

^FO30,437
^FDEnd 1: {{C1}}^FS

^FO30,477
^FDEnd 2: {{C2}}^FS

^FO30,517
^FDSeam 1: {{S1}}^FS

^FX COMMENT: Set default font size for QR code section ^FS
^CF0,30

^FO550,350
^BQN,2,7^FDHA,{{

STRATUS

Stratus.Part.QRCode}}^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO20,425
^GB310,142,6,B

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in

STRATUS

Stratus. This can be used to shift the entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Material	Label Recommendation
Carbon Steel/Stainless Steel Pipe 2-1/2” and Larger	Label Type - PolyPro 3000T Z-Ultimate 3000T Z-Ultimate 4000T Label Size 4” x 3”
Carbon Steel/Stainless Steel Pipe 2” and Smaller	Label Type - PolyPro 3000T Z-Ultimate 3000T Z-Ultimate 4000T Label Size 4” x 2”
Copper	Label Type - Any label listed in above sections Label Size 3” x 1.5” 3” x 1” 2” x 1.5”
PVC/Plastics	Label Type - PolyPro 3000T Z-Ultimate 3000T Z-Ultimate 4000T Label Size 4” x 3” 4” x 2”
Cast Iron	Label Type - PolyPro 3000T Z-Ultimate 3000T Z-Ultimate 4000T Label Size 4” x 3” 4” x 2”
Support Materials Strut/All Thread	Label Type - Z-Select 2000D Z-Select 4000D Label Size 4” x 6” 4” x 4”

Printing Labels Troubleshooting Steps

Sometimes if you install your ZPL printer directly from Windows, it won't work.

If

this is

your

situation (

the ZPL won't print

)In Windows, under Printers, uninstall all unwanted printers from computer (many times, printing issues involve conflicting printer and print drivers).

, consider the following steps:

Install the ZPL Setup Utility https://www.zebra.com/us/en/support-downloads/printer-software/printer-setup-utilities.html
Install your ZPL printer drives from the Zebra Setup Utility
In Windows under Printers (see image below)
1. Uninstall your ZPL printer
2. Then, using the Zebra Setup Utility, reinstall your printer
3. set your ZPL printer as the default printer.

Image Removed

Make sure in Windows Settings Printers, that your ZPL is your default printer (go to step Default Printer Step 4 below)
If you installed your ZPL printer directly from Windows, it won't work. In that case, uninstall and reinstall as per the following steps.
Reinstall as Needed
1. Start and Stop your Print Spooler under Task Manager > Services.
  Image Added
2. Right click (or long-press on tablet) and stop, then start this service.
3. Install the ZPL Setup Utility. https://www.zebra.com/us/en/support-downloads/printer-software/printer-setup-utilities.html
  Image Added
4. Install your ZPL printer drives from the Zebra Setup Utility.
  1. In Windows under Printers (see image below):
  2. Uninstall your ZPL printer.
  3. Then, using the Zebra Setup Utility, reinstall your printer.

Set as Default Printer

Set Default Printer
1. Set your ZPL printer as the default printer.

Image Added

d. In Windows 11:

"Let Windows manage my default printer" is ON.
Turn off (or toggle off) the setting "Let Windows manage my default printer".

In Windows, under Printers, uninstall all unwanted printers from computer (many times, printing issues involve conflicting printer and print drivers).
Print a test page from Windows (if that works, try from the Stratus Printer App as well)

It Prints, but not from the Stratus Printer App

If you can print a test label from the Zebra Setup Utility, but not from the Stratus Printer App

Verify that you have the latest version of the Stratus Printer App installed.
1. To see a list of available versions from GTP, run this command from a command prompt – i.e., type CMD into the Windows search bar, run that, then type in the following command:
  winget show GTPSoftware.Print -s GtpSoftware --versions
2. Compare this to the version of your Printer app.
Verify that the Stratus Print application is open.
Verify that the printer is not asleep.
Verify the computer has a station assigned to it if attempting to print from a station.
Read the LOG file generated by the Stratus Print app.
1. Exit the Stratus Print app first (so that it will flush its remaining log entries),
2. then go to
  C:\Users\<Windows User>\AppData\Roaming\GTP STRATUS Logs\Print\
3. See the Log.Txt file in that folder.
4. Open with notepad or some other tool.
  1. Note well: The newest activity is at the bottom (the oldest log activity is at the top).
5. From top down, search for the word “Error” or “Warn”
Check Windows User Rights: You do not need to run the Stratus Printer app as an administrator, but IT department must not lock down the user profile's write rights to the %appdata% part of the hard drive.
Check Firewalls: The Workstation app uses SignalR over port 443, therefore your IT department has to allow websockets via your firewall.
If you cannot print with a certain user, troubleshoot by trying to print with a user that has elevated rights on the machine and in Stratus.
Try to print a label from a computer NOT connected to your network. If you don’t know how to do this, the GTP SD team can impersonate a user in your company and print to one of their ZPL printers. If they are able to print to a ZPL from Stratus via a user from your company, then there is likely a Windows policy on your computer that prevents the app (via that user) from printing.
If you still have no success, send the log file from Step 1 above to the GTP Service Desk

Version	Old Version 18	New Version Current
Changes made by	Frank Scott	Steve Rives
Saved on	Feb 27, 2024	Jan 24, 2025

Versions Compared

Key

Printing Labels Troubleshooting Steps

Set as Default Printer

It Prints, but not from the Stratus Printer App

Content Comparison

Versions Compared

Key

Printing Labels Troubleshooting Steps

Set as Default Printer

It Prints, but not from the Stratus Printer App