Page Comparison

This article describes tools and techniques to improve use STRATUS usablility on a Tablet or iPad.

Multiple Part Selection and Assembly Selection

The Multiple Part Selection and the Assembly Selection options can be used by Tablet and iPad users to select multiple parts or assemblies in any of the Viewer pages. Both features work the same. Below is an example of how to use the Multiple Part Selection feature:

1. Click the Click to Change Settings gear icon and then select the Multiple Part Selection checkbox in the sub-menu.
2. Click either a part or space on the canvas and the sub-menu will disappear.
3. Click multiple parts and they will all be selected.
4. Click the first part, the last part, and then the Select Connected tool to select all parts between the 2 initially selected parts.
5. Tools like those under Actions can be used once parts are selected.
   Image Added
   
   
6. Click in empty space to clear your part selections.

Assembly Viewer Toggle Orientation

Use the Toggle Orientation button to give you more screen width when viewing an assembly with a table.

1. Below is the default side-by-side view where the 3D View is next to the Parts list.
2. Click the Toggle Orientation button (top right) to toggle the page layout.
   Image RemovedImage Added
   
   
3. The Parts list will re-orient under the 3D view and both views expand to the width of the tablet.
   Image RemovedImage Added
   
   
4. Click the Toggle Orientation button again to restore the side-by-side orientation.

Assembly

Parts Table Zoom

To zoom the size of the Part's tab table list, click the minus or plus Table buttons.

Image Added

Assembly STRATUS Sheet Full Screen and Zoom buttons

1. Once you have generated a report STRATUS Sheet under Assemblies > Viewer > Report, to STRATUS Sheet
   1. To maximize the screen size, click the Full Screen Mode Image Modified button.
   Image Removed
   1. To zoom the sheet size, click the Zoom Out or Zoom In button. 
      
      Image Added
      
      
2. Click the Exit Full Screen Mode button to return to the normal view.
   
   Image AddedImage Removed

Tablet Recomendations

STRATUS can run on any web-enabled device. Based on customer feedback, the Customer Success Group recommends Microsft Surface tablets. Below is a summary.

1. Finger navigation - When navigating with your finger, you are either touching the screen or not. Your finger does not provide any functionality when hovering over an object.
2. Hover Pen navigation - (Recommended) Surface tablet pens provide the ability to hover over buttons. Hover 1/8" to 1/4" above the object to view options. (Option) Currently, iPad pens do not provide this functionality. The ability to hover over objects enables you to manually pull dimensions using the STRATUS Dimensioning tool. Pens enable operators to keep gloves on and still execute many touchscreen functions. There are some work glove brands that enable use of gloved fingers on touchscreens.
3. Zoom - (Recommended) Zoom is the same on any tablet whereby 2 fingers are used to zoom in/out.
4. Pan - (Recommended) Select the Forge Viewer's Pan tool to pan the viewer. This allows you to pan with one finger. (Option) With 2 fingers pressing the screen, pan the viewer.
5. Rotate - (Recommended) Use the dimension cube to rotate the view with a pen; it's difficult to use with your finger. (Option) With 2 fingers pressing the screen, swivel your 2 fingers to rotate.
6. Select Multiple parts - (Recommended) Use the STRATUS gear as described above to select multiple parts or to use the Select Connected tool.
7. Full Screen - (Recommended) Use the Toggle Orientation button (top right) to toggle the page layout so that the 3D viewer and the Parts list are vertically in full screen mode.(Option) Use the Forge Viewer Full Screen tool which puts the 3D viewer in full screen mode but eliminates the Parts list.
8. Display Grid and Grid Offset Measurement tools - Both tools work well to pull dimensions on any tablet.
9. Move tags - Touch tag to select and then touch the target position to move and place the tag. There is no click and drag capability on a tablet.
10. Manual Dimensioning - (Recommended) Surface tablet pens provide the ability to hover over buttons which will cycle through and select the dimensioning node. Once selected, drag to place the dimension.
    Image Added

Report Won't Generate on iPad

When a report won't generate (Ex. Models > Viewer > Actions > Report > a CSV or PDF report) on an iPad, the problem is usually with the Safari Pop-Up Blocker.

To fix the issue:

1. Go to Settings > Safari > Block Pop-Ups and turn off the setting to Block Pop-Ups.