RazorGage has TWO kinds of RazorGage. If you get an RG3, you can communicate with Stratus through an experimental version of the WorkstationApp. If you have the older RazorGage, you will need to see the page on RGST: https://gtpservices.atlassian.net/wiki/x/VoIFaQ
...
RG3 must be installed on the same PC as you install the Workstation APP.
You should see this icon (don’t click it yet!)
...
If you don’t have RG3 installed, please contact RazorGage to obtain an installer.
...
The RazorGage RG3 exposes a form of communication through COM ports which allows the Stratus Workstation App to communicate to RG3. For this reason, you should purchases a split serial cable and a null modem as follows:
You can buy this cabling from RazorGage, or get the null modem and similar split DB9 from these sources:
https://www.neweggbusiness.com/product/product.aspx?item=9siv15664u2466&bri=9siv0gs6619335
https://www.amazon.com/CableMax-Serial-5ft-Cable-Adapter-Windows/dp/B01N0HBQUG
(these links last accessed 1/4/2024)
Connect the null modem as follows:
...
If the above steps did not work, then you can open Windows File explorer and go to:
C:\RG3\Parameters
From there, right-click on “MachineParameters.json” and edit with Notepad.
...