Divisions (Admin)

Divisions (Admin)

 

Divisions help companies manage operations across multiple locations and provides the ability to:

  • Create organizational hierarchies that mirror real-world operations

  • Control workflow access with location-based permissions

  • Assign divisions to packages independently of tracking status changes (i.e. updating a division will not update the tracking status)

  • Ensure sub-packages automatically inherit parent package divisions

  • Prevent cross-location operational errors

 

Transition Summary

Divisions allows administrators to manage operations across multiple locations, and replaces the Legacy Divisions feature. For Stratus customers prior to this release, this section covers how to transition from the Legacy Divisions to the new Divisions feature.

Recommended Transition Steps

The Divisions feature uses a dual-mode operation that enables companies to configure a new Division hierarchy matching their organizational structure, then transition at their own pace. The recommended steps include:

  1. Contact your Customer Success: Contact your Customer Success representative to learn about the new Divisions feature and have it turned on for your company.

  2. Review Current Divisions: Analyze the existing flat Division structure

  3. Plan Hierarchy: Map out Locations and Divisions before implementation

    1. Start Simple: Begin with Locations and major Divisions, then add subdivisions as needed

    2. Mirror Reality: Organize Divisions to match the organization’s actual physical layout and workflow

    3. Clear Naming: Use descriptive Names and/or Short Codes that are immediately recognizable to the organization

    4. Avoid Deep Nesting: Keep Division nesting to 3-4 levels maximum for simplicity

  4. Configure in Preview Mode: Build the hierarchy while the old system is still active

  5. Test New Locations and Divisions with Test Project Roles: Verify workflows with project roles, a test project, and test packages and assemblies before full rollout

  6. Assign Project Roles: Users will not have access to newly created Locations and Divisions until Project Role assignments are configured

  7. Train Key Users: Ensure supervisors understand the new system

  8. Activate: Enable the hierarchical divisions setting

Divisions Organizational Structure

The complete organizational structure (Company > Location > Division > Station > Tool) is displayed in single interface.

Level

Description

Company

The company name and top-level division representing the entire organization.

Location

Physical facilities or sites where work is performed. Examples: Arizona Fabrication Shop, Houston Assembly Plant, Dallas Facility.

Division

Departments or work areas within a location. Examples: Piping Fabrication, Welding, Assembly, Quality Control.

Station

Specific workstations assigned to divisions. Examples: Welding Station 1, CNC Machine 3, Assembly Table B.

Tool

Equipment associated with stations. Tools automatically inherit division assignments from their parent stations.

 

Example Hierarchy

  • Company

    • Lawrence (Location) | Phase

      • Piping Fabrication (Division) | Phase

        • Novarc (Station)

          • Novarc SWR (Tool)

Example Division Dropdown

For examples of how the Division dropdown display in Stratus, see the Division Features article.

Toggle Between Divisions and Divisions (NEW)

To review current Divisions and configure new Divisions, toggle between the two tabs:

  1. Navigate to Admin > Company > Divisions. Both the new hierarchical divisions page and existing flat divisions tabs are visible.

    1. Divisions (Default) - The legacy Divisions remains fully functional within Stratus.

       

    2. Divisions (NEW) - The new interface is available for configuration and preview. See the Configuration section.

       

  2. Configure the new Divisions hierarchy.

  3. When done configuring and testing the new Divisions hierarchy, check the Enable hierarchical divisions throughout application checkbox.

    1. The new hierarchical interface becomes the primary system.

    2. All division dropdowns show the hierarchical format (Location > Division).

    3. Default reports use the hierarchical division format.

  4. Note: An administrator can return to the legacy interface, however, the hierarchical structure will be preserved for when it is re-enabled.

Configuration

  1. Navigate to Admin > Company > Divisions.

  2. Click the Divisions (New) tab.

  3. The hierarchical tree view is on the left and division details on the right.

     

  4. Use the Search feature to filter the hierarchy.

Create Location

  1. Note: For companies with existing legacy Division configurations, those Divisions, Stations, and Tools have been automatically nested as child divisions under the Default Location. The Default Location can be renamed, or, the Parent Division of each Division, Station, and Tool can be edited.

     

  2. To create a new Location, click the Create button, click the Location button on the What would you like to create? dialog, and then click Next.

     

    1. Location Name (Required) - Enter the Location Name (e.g., “Arizona Fabrication Shop”)

    2. Short Code (Optional) - Enter a Short Code. If entered, the Short Code will display wherever the location is selected and displayed. Otherwise, the Location Name will display.

    3. Phase (Required) - Select a Phase (e.g., Office, Purchasing, Shop, or Field).

      1. When a Phase is enabled for a Tracking Status, the Location becomes visible for packages or assemblies using that status. For example, if "Assembled" is only assigned to the Shop Phase, it will not appear as a selectable option when a package's status changes to "Received on Jobsite" (which is assigned to the Field Phase).

    4. Override Inherited Address (Optional) - Addresses displayed under the Divisions tab are currently not used elsewhere in Stratus and cannot be referenced in reports.

      1. Checked - When checked, an address that overrides the parent can be entered.

      2. Unchecked - Address will be inherited from parent.

    5. Notes (Optional) - Enter a Note. Notes displayed under the Divisions tab are currently not used elsewhere in Stratus and cannot be referenced in reports.

  3. Click Create Location. The Location will display along with the selected Phase. The location can be edited by clicking it in the hierarchy.

    1. Note: The Location name is added to Admin > Company > Project Roles under Divisions so that it can be permissioned.

Create Division

Create and manage stations directly within their parent division context.

Workflow Filtering: Limit available stations and tools in Cut Lists and Send-to-Tool workflows based on package or assembly Division (assembly division when sending to tool from assembly viewer).

  1. Click the Create button, click the Division button on the What would you like to create? dialog, and then click Next.

     

    1. Division Name (Required) - Enter the Division Name (e.g., “Piping Fabrication”).

    2. Short Code (Optional) - Enter a Short Code. If entered, the Short Code will display wherever the division is selected and displayed. Otherwise, the Division Name will display.

    3. Parent (Required) - Select the appropriate Location or Division as the parent.

    4. Phase (Required) - Select a Phase (e.g., Office, Purchasing, Shop, or Field).

      1. When a Phase is enabled for a Tracking Status, the Division becomes visible for packages or assemblies using that status. For example, if "Assembled" is only assigned to the Shop Phase, it will not appear as a selectable option when a package's status changes to "Received on Jobsite" (which is assigned to the Field Phase).

    5. Address (Optional) - Addresses displayed under the Divisions tab are currently not used elsewhere in Stratus and cannot be referenced in reports.

      1. Checked - When checked, an address that overrides the parent can be entered.

      2. Unchecked - Address will be inherited from parent.

    6. Notes (Optional) - Enter a Note. Notes displayed under the Divisions tab are currently not used elsewhere in Stratus and cannot be referenced in reports.

  2. Click Create Division. The Division will display under the selected parent along with the selected Phase.

    1. Note: The Division name is added to Admin > Company > Project Roles under Divisions so that it can be permissioned.

Duplicate Division

To duplicate a Division:

  1. Select the Division.

  2. In the details of the Division, click the Duplicate button at the bottom. The Duplicate Division dialog will display.

     

  3. Click the Duplicate Division button.

  4. Edit the new Division as needed.

Delete Division

To delete a Division:

  1. Select the Division.

  2. In the details of the Division, click the Delete Division button at the bottom. The Duplicate Division dialog will display.

     

  3. A default location will be selected. Select a different location to move the child divisions.

  4. Click the Delete Location button.

Create Station

Stations operate independently of phase settings, unlike Locations and Divisions.

A Tool can be associated with one Station.

  1. Click the Create button, click the Station button on the What would you like to create? dialog, and then click Next.

     

    1. Station Name (Required) - Enter the Station Name (e.g., “Weld 3, Printer, etc.”).

      1. Tip: Use a standardized naming convention that uses a prefix so that the Stations sort in a logical way. Station names are selected on the Package's Cut Lists tab and the Package's Point Lists tab.

    2. Description (Optional) - Enter a Description. 100-character maximum.

    3. Parent (Required) - Select the appropriate Location or Division as the parent.

  2. Click Create Station. The Station will display under the selected parent.

  3. Once the Station is created, select the Station to configure the following:

     

    1. Device Assignment

      1. Check Device Assignment to filter tasks assigned to a station in a Task Definition.

        1. Note: Checking Device Assignment here in Divisions is the same as checking the Assigned to this device checkbox under Stations.

        2. Note: The Assigned Device icon display next to the Station when the Device Assignment checkbox has been checked.

      2. When the Assigned this station to this device checkbox is checked, the station image, if added, will display at the top of all Stratus pages next to the user's badge. Otherwise, the default image will display. Hover over this image to display the station name.

    2. Assigned Tool - Select the Tool. See the Tools (Admin) article for more information.  A Tool cannot be assigned to multiple stations, but multiple Tools can be assigned to a Station.

    3. Station Image - Browse to upload the image file from your computer. The image will be used instead of the default image if it is uploaded. If an image is added, it will display at the top of all Stratus pages next to the user's badge. Otherwise, the default image will display. Hover over this image to display the station name.

    4. Assigned Tasks - When tasks are selected, these tasks will be generated for the assigned device based on the package tracking status configured by the administrator. See the Task Definitions article for more information.

    5. Managed Materials - A Managed Material is used when a cut list is generated. In this case, the Station will automatically be selected based on the Material and Trade Size. See the Materials (Admin) article for more information. Select all Managed Materials that can be sent to this Station.

  4. Click Save Changes.

  5. Delete Station - Along with Save Changes, the Delete Station button is also an option. The Delete Station prompt will display.

Project Roles

Configure Project Role assignments to provide users access to Locations, Divisions, and related packages and assemblies.

  1. Navigate to Admin > Company > Project Roles.

  2. Click the Divisions dropdown.

  3. Assign Project Roles to Locations and Divisions. Note: Users assigned to parent locations automatically receive access to all child divisions.