The following is a list of updates related to the STRATUS Addin for Revit and AutoCAD used for publishing models to STRATUS. This information will help companies determine if they want to update software or wait until the mandatory quarterly update is made available. Customers who encounter a publish issue that has been fixed by an updated version of the software will be required to install the latest software version.

No Installer Updates in this release.

Added BIM Area Elevation report properties XYZ for Part Connectors C1, C2, C3, C4. A workcase example is installing a waste stack where there is a sanitee looking out to a sink and the elevation of the sanitee is needed. Depending on how the object is configured, the elevation can now be from one of the connectors' Z value which would inform the user that the sanitee is 18” above the floor. This eliminates the need to look at an install drawing because the spool drawing can include the install elevation. This value can:

• Add positioning to sloped pipe labels

• Eliminate the need to look at an install drawing because the spool drawing can include the install elevation

• Provide QA/QC information

• Generate a CSV report to send to a Total Station

Open

Open

Before this update, it was not possible to report hanger points since hangers may have 2 points and each point would need to be in its own row in the csv output. As a result, With this update, companies can create two (2) sub-reports, one for point 1 and one for point 2, and then a Master report to combine them. In this solution, the report headers in the second report (Ex. Sub Points C2) are ignored so the end result of the master report is correct. In addition, a suffix (Ex. -1 or -2) can be used to distinguish points. In the example below, the part Item Number is used as the name but another part identifier could be be configured. Below is an example report configuration. Note: A part filter may need to be applied to the second hanger point sub-report to only include points for trapeze hangers, filtering out single rod parts like clevis.

Master Report

Open

Sub-report for C2

Open

Sub-report for C3

Open

Example Report to Download

Open

Updated the Containers > Dashboard to automatically display container contents after a container is scanned on the Containers > Assign tab. Previously, the Containers > Dashboard page had to be refreshed before the scanned contents would display.

Open

Fixed an issue where the date display for the STRATUS.Part.TrackingStatusLogDT field did not display correctly.

Open

Fixed an issue that prevented editing comments and hours after tracking entries exceeded 10 under the Tracking tab for Assemblies and Packages.

Open

Fixed a Project Roles issue on the Packages > Dashboard where a user without Project Role > Package Dashboard > Details permission is now able to view packages on the Package Dashboard. The minimum Project Role requirements to view packages on the Packages > Dashboard includes permission to:

1. Packages > Dashboard

   1. Dashboard Table

2. Packages > Categories

   1. At least one category

3. Tracking Statuses

   1. At least one tracking status

4. Divisions

   1. At least one division

Fixed an issue under Projects > Areas where editing either the Bottom Range or the Top Range resulted in GUID values displaying rather than the selected display value.

Open