The GTP Customer Success Team offers Implementation and Q&A webinars.

Table of Contents

1 Recordings:

Recordings:

12/07/2023 Hanger Fabrication Masterclass_ Building Efficiency from the Top Down

11/02/2023 Stratus Release Review + Ask The Experts Webinar

10/25/2023 Alterman's Success Story: Stratus Powered Digital Workflows for Electrical Contractors

9/28/2023 Label It with Stratus

9/21/2023 Using Field Orderz to Eliminate Paper Workflows with Tweet-Garot

8/31/2023 Stratus Updates And Ask The Experts

6/23/2023 Stratus Innovate 2023 Preview Hosted by the Construction Dorks

6/1/2023 Stratus New Numbering Workflows in Stratus

5/18/2023 Stratus Updates And Ask The Experts

5/04/2023 Your Digital Twin in Stratus: Understanding Shared Parameters and Fabrication Content

3/09/2023 The Power of Fields in Stratus (Strategies from Stratus Pulse Series)

10/27/2022 CSG Webinar: Accessing the Stratus API for Project Tracking and Analytics

10/06/2022 CSG Webinar: Package Planning-Scheduling with the Dashboard and Gantt Chart

Four Piping Solutions with Field Orderz Webinar

Duct Solutions with Field Orderz Webinar

How MEP Contractors Can Prepare for CMMC 2.0 Compliance _ Hosted by Terry Humphries with Special Guest Nick Espinosa

06/23/222 CSG Webinar: Integrating Containers into Your Shop

03/24/222 CSG Webinar: Stratus Updates And Ask The Experts Webinar

03/10/222 CSG Webinar: How to Start Weld Tracking in Stratus

02/24/222 CSG Webinar: Stratus Updates And Ask The Experts Webinar

01/20/22 CSG Webinar: Stratus Updates And Ask The Experts Webinar

01/06/22 CSG Webinar: Get Your Material Take Off On Demand and Digital

04/30/21 CSG Webinar: What's New In The Zoo?

00:00 Review of new features released in 2021 to date

04/16/21 CSG Webinar: GTP Cut Application

00:00 Release Notes Review
02:20 Download GTP Stratus TigerStop Workstation
03:00 Settings - General
11:45 Settings - TigerStop
15:00 Questions about TigerStop Automated Cutting
18:15 Admin > Tools > Label Template
19:30 Using the GTP Stratus TigerStop Workstation application

04/09/21 CSG Webinar: Advanced Filtering

00:00 Release Notes Review
06:40 Filters vs. Groupings
11:00 Project Data Fixer Filter
13:30 Filters with Model Viewer Checked
16:30 Filter Conditions for Mains and Olets

04/02/21 CSG Webinar: Stratus In-Depth Series, The Assemblies Module

00:00 Introduction and Release Notes
11:00 Filter Spools
13:00 Can Assemble Tracking Status
13:30 Rename Assembly
13:55 Scan QR Code to display Assemblies Viewer page
15:00 Toggle Assemblies View for Tablets
16:20 Display Mode Tool
15:50 Grid Offset Measurement Tool
17:20 Explode Model Forge Tool
18:00 Numbering Tool
19:30 Annotation Tags Tool
22:15 Custom Notes
23:10 Attachments
24:30 Dimensioning Tool
31:00 Save Default Extensions Tool
32:30 Find Part
33:00 Spool Checker Tool

03/25/2021 CSG Webinar: Leveraging Groupings In Your Filters

00:00 Release Notes Review
05:40 Groupings Are Applied to Filters
07:30 Project Fixer Filters
18:40 Apply Grouping to Filters used in the Models Viewer
20:00 Grouping Examples

03/18/2021 CSG Webinar: View Styles For PDF Templates

00:00 Release Notes Review
03:15 View Styles Linked to Templates
04:30 View Styles Configuration
05:30 Render, Appearance, Visibility Examples
12:00 Part, Dimension, Tag Visibility Examples
18:00 Line Weights, Fonts, Arrowheads
25:25 Item Number - Leaders, Arrowheads, Background Bubble Color

03/11/2021 CSG Webinar: Setting Up PDF Templates

00:00 Introduction
02:20 Relationship Between a Report and a Template
4:10 Template Types
10:15 Assemblies Viewer Template
14:20 Title Block
19:50 Multiple Page Templates
31:30 Questions

03/04/2021 CSG Webinar: Deliverables

00:00 Introduction
02:50 Projects > Deliverables
9:45 Deliverable Definitions
14:00 Verify Filters in Models > Viewer
17:45 Projects > Deliverables Settings
24:00 Generate Deliverables
26:00 Generate Packages
33:00 Recap
35:40 Release Notes Review

02/25/2021 CSG Webinar: Setting Up Project Roles

00:00 Release Notes Review
05:00 Project Roles
20:50 Tracking Status and Processors

02/18/2021 CSG Webinar: Advanced Label Creation

00:00 Release Note Review
09:10 Label Introduction
13:50 Cut List Label - Fields and Tools
20:55 Cut List Label - Add Logo
24:00 ZPL Report Label
31:45 Formatting Label
38:30 Print Emulator and GTP Stratus Print

02/11/2021 CSG Webinar: Naming And Numbering

00:00 Release Note Review
05:00 Admin > Company > Naming and Numbering > Naming Conventions
15:50 Admin > Company > Naming and Numbering > Numbering Rules
18:30 Admin > Company > Naming and Numbering > Numbering Rules > Matching Parts Get Same Item Number
21:00 Admin > Company > Naming and Numbering > Numbering Schemes
28:00 Admin > Project > Settings
29:30 Questions

01/28/2021 CSG Webinar: Stratus In-Depth Series, The Packages Module

00:00 Release Note Review
04:00 Packages Default - Tab
05:55 Packages Dashboard - Filters
08:05 Packages Dashboard - Force Refresh of Calculated Fields
09:05 Archive
10:00 Packages Dashboard - Download CSV
11:20 Packages Schedule
12:10 Packages Status Board
12:35 Status Hierarchy
15:00 Package Details
16:30 Package > Viewer > Filter
20:00 Package > Naming and Numbering
22:30 Package > Stratus Sheet
30:40 Package > Properties
32:10 Package > Items
34:10 Package > BOM
44:10 Package > Cut List
47:00 Package > Point List
52:50 Package > Notes
54:30 Package > Attachments
54:20 Packages Dashboard - MAJ File
56:40 Package > Tracking

01/21/2021 CSG Webinar: Stratus In-Depth Series, The Models Module

00:00 Release Note Review
03:00 Models Dashboard
06:20 Models Viewer
07:10 Models Viewer - Cache
07:55 Models Viewer - Gear Options
10:30 Models Viewer - Autodesk Toolbar and Settings
16:50 Models Viewer - Display Modes
20:10 Models Viewer - Filters
23:10 Models Viewer - Actions
26:10 Models Viewer - Window Select
26:50 Models Viewer - Select Connect
28:00 Models Viewer - Properties
28:10 Models Viewer - Display Grid
32:10 Questions

01/14/2021 - Stratus Purchasing Tab: What is it and how do I use it?

01/07/2021 - Production Tracking

02:05 Custom Package Dashboard
05:10 Fabrication Earned Hours
07:30 Tracking Status Parent / Child Relationship
13:35 Spool Tracking with a monitor in the shop
18:00 Spool Tracking Using Scan tab
22:00 Update Fabrication Earned Hours
25:30 Actual Hours Complete
34:50 Task Definitions

12/17/2020 - Ask The Experts!

02:00 Ancillary Cut List
10:05 How to get model color views in Stratus?
12:39 How to get the Total Length of Pipe in a BOM Report when there is a text suffix?
15:00 Cut List Override
23:30 View Templates

12/10/2020 - Publishing from Revit and AutoCAD best practices

12/03/2020 - Leveraging your data with Fields

11/25/2020 - Hanger And Support Spooling/Fabrication Workflows

01:00 Prefabrication Filters and Package
03:15 Packages Dashboard
04:00 Renumber Hangers with Filters
06:00 Part Template Item Number
12:15 2 Ways to Communicate with the Field 1. Print Drawing 2. Stickers
12:35 Print Drawing - Package Details Report with QR Codes
15:45 Package Cut List Grouped by Rod Size Using Field to Determine Cut Length
21:00 Station Managed Materials
24:30 Stratus Cutting Workstation (TigerStop) and Sticker
27:30 Centerline and Bottom Elevation Sticker Data
30:00 Single Rod Hanger Standard Length Sticker

11/19/2020 - Electrical Spooling/Fabrication Workflows

00:00 Introduction
05:00 Setting: Use Parameters Mapping for Assembly Import and Publish
07:30 Groupings and Filters
13:30 Underground Package
14:40 Task Definitions
19:50 Generate Tasks Based on Tracking Status
22:30 Shops and Tasks Tabs
30:00 Stations - Assign to Station
31:00 Package Tasks and Assembly Tasks
38:00 Settings: Publish Greenlee BendWorks Assemblies
43:00 Settings: Generate Tasks

11/12/2020 - Ask The Experts!

00:25 Webinar Announcement: Paper? Where we're going, we don't need paper.
01:40 Q: Spool Map on Stratus Sheet
12:15 Q: Project Roles - Save Default Extensions
14:20 Q: Project Roles - View Stratus Sheet
17:50 Q: Settings Create Spool Drawings During Import + Publish Spool Drawings
21:40 Q: API Example

11/05/2020 - Sheet Metal Spooling/Fabrication Workflows

01:30 Filters
03:55 Create Packages
06:00 Packages Dashboard
07:50 Numbering Rules and Filters
13:00 Spools
16:30 How to Cut Holes in Duct
19:00 Assemblies Viewer
23:20 BOM with Ancillaries
26:06 Generate MAJ File
27:00 Notes
30:00 Dimensioning
33:20 CAMDUCT / MAJ File
36:00 Fabrication Data from Stratus
37:50 Labels
39:50 Filter Packages and Assemblies / Spools

10/29/2020 - Carbon Steel Grv Spooling/Fabrication Workflows

01:20 Approaches to Victaulic Fabrication
02:00 Spool Victaulic Fabrication
08:10 Spool Map and Loose Fittings
14:18 View Template
19:10 Why do you have duplicate VDC packages and Fab packages?
28:13 PypeServer - Part Templates > Cut List Mapping
30:55 How do you label the plain end?
36:50 When do you adjust the cut length?

10/22/2020 - Ask The Experts!

00:54 New Feature: Ability to Rollback and Re-Publish a Model
02:46 Limiting Access to Project Roles
07:54 Quickest way to add users to multiple projects
09:54 BOM Purchasing Process
26:20 Batch Printing PDF for Spools
27:40 Create Master Report the lists all assemblies as individual BOM's
34:42 Cut List Status

10/15/2020 - Carbon Steel BW Spooling/Fabrication Workflows

00:00 Filter and Package
04:35 Package BOM Linear Nesting
07:13 Assembly Viewer Report and Numbering
09:05 Drill down into Naming and Numbering - Numbering Rule
10:00 Numbering Scheme - Apply Numbering Rules
10:25 Weldages Report - Edit Weld ID, Heat Number, and Notes
13:45 Custom Data Field or Revit Parameter
14:50 Part Template - Editable Weld Properties
16:30 Weld Map View Style
19:10 Validate Cut Information .psvr file - Send to Tool
21:00 JSON Formatter Validator
23:10 Pipe Cut Configuration
26:00 Pattern 2875 - Part Templates > Cut List Mappings > Consider for Multi-Axis Cut Lists
30:45 Tips and Tricks - Track Field Welds vs Shop Welds

10/08/2020 - Cast Iron NH Spooling/Fabrication Workflows

00:25 Methodology: Kit or Spool
01:14 Method 1: Kit and Send
04:16 Naming and Numbering
05:50 Stratus Sheet
09:29 Method 2: Spool and Assemble
13:44 Naming, Numbering, and Annotation
14:20 BOM
18:33 Cut List
19:15 Material Alias
21:51 Automatically apply Material Alias to Cut List at Station
29:27 Send Cut List to Station - GTP Stratus Workstation (TigerStop App)
30:40 Label and Connected To Data Shop vs. Field

10/01/2020 - Copper Piping Spooling/Fabrication Workflows

00:00 Introduction
00:42 Workflow Diagram
01:30 Filer Copper in Models Viewer to Create Package
03:37 Question: How are Areas Created?
05:40 Create Package
07:25 Packages Dashboard
08:00 Method #1 - Generate BOM Report via Packages > Attachments > Report
09:00 Method #2 - Generate BOM Report via Packages > BOM
11:10 Create Spools
17:25 Create Packages > Cut Lists
18:35 Admin > Company > Part Templates > Cut List Mapping > User Data
20:39 Admin > Company > Materials
21:04 Admin > Company > Stations - Automatically selected the Station based on Material
25:40 Send Cut List to Station
26:05 Cut List in GTP Stratus Workstation (TigerStop)
28:18 Labels

09/24/2020 - Ask The Experts!

00:32 How to prevent items with same CID from display in Cut List?
03:35 How to Generate Cut List Mapping for Trapeze hangers?
08:15 What is the difference between the Place Linear Length Measurement tool and the Place Aligned Length Measurement tool?
14:42 How to use UserData1 and UserData2 to get data on a Label?
18:46 How to wrap text on a label?
21:40 How to generate Bill of Lading report for a Container?
26:21 Has Stratus been slow lately?
27:31 Is Firefox or Chrome faster?

09/17/2020 - Package BOM Interface

00:00 Introduction
01:10 Packages Dashboard
01:37 Traditional BOM Report (Limited)
02:30 Packages BOM tab
03:20 Generate BOM
04:17 Linear Nests
05:43 BOM Line Item Override
08:44 Nominal Stock Length
10:00 Auto Linear Nest
12:03 Hide Columns
12:47 Default Report
15:23 Non-modeled BOM Items
16:14 Exclude Line Items
17:34 Ancillaries
25:18 Revit Ancillaries

09/10/2020 - Containers

00:16 Containers Introduction
00:51 Containers Setup - Admin > Company > Containers
04:15 Containers Module
07:48 Package Viewer > Filters > Containers
10:07 Container Contents Report
11:05 Container within a Container
14:04 Container and Container Children Tracking Statuses
17:01 Scan Module
20:35 How can I ship multi-trade racks?
20:45 Would I setup a job site as a Container?

09/03/2020 - Multi-Axis Pipe Cutter

02:05 Database Settings Fabrication CADMep
04:34 Connectors
05:28 What do I do if the model is drawn but doesn't have material information? UPDATEFROMSOURCE command
06:49 Stratus Pipe Cuts
08:55 RFA and Part Templates > Cut List Mapping
11:20 Saddles, Olets, Connectors and Part Templates > Cut List Mapping
16:37 RFA Saddles, Olets, Connectors Saddles
17:39 Validate .PSVR File Data with JSON Formatter
20:25 Direct Integration .3DPP or PypeServer
23:30 API Integration

08/27/2020 - Deliverables

00:35 Deliverables Definition
01:00 Setup Company Filters
03:25 Setup Company Deliverable Definitions
04:19 Setup Company Naming and Numbering > Package Naming
05:04 Setup Company Package Categories
05:30 Setup Project Areas
07:20 Setup Project Deliverables
11:33 Generate Project Deliverables
14:04 Create Packages

08/13/2020 - Using your TigerStop with Stratus!

00:00 Cut List Introduction
01:22 Can Cut Tracking Status
02:28 Generate Cut List for a Package - Package's Cut List tab
03:35 Generate Cut List for a Part - Assembly Viewer
04:29 Pipe - Part Templates > Cut List Mappings
08:27 Hanger Rod - Part Templates > Cut List Mappings
12:47 Tool and Station Setup
13:54 Send Package Cut List to Station
14:19 TigerStop Station and General Workstation Settings
25:52 TigerStop Station and Filtering Projects, Models, Packages, Assemblies, Grouping
24:52 TigerStop Station and TigerStop Workstation Settings
27:46 Use the TigerStop Workstation for non-TigerStop workflows
28:54 TigerStop Workstation Dynamic Nesting
30:09 Labels for Different Tools

08/06/2020 - Setting up “Naming And Numbering” for best results!

0:33 Admin > Company > Naming and Numbering
1:51 Adimn > Company > Settings > Item Numbering
4:23 Numbering Rules and Part Filters
10:19 Admin > Company > Part Templates - Matching parts get same number
14:28 Admin > Company > Naming and Numbering > Naming Conventions
21:26 Admin > Company > Naming and Numbering > Numbering Schemes
26:22 Admin > Project > Settings > Item Number to set numbering by project
27:18 Question: How to not number a part?
29:46 Question: How to autonumber parts of assemblies created in Revit?

07/30/2020 - Multi-Trade racks/skids in Stratus!

0:15 Modular - Multi-Trade racks, skids, something to assemble
1:25 Limitations
2:30 Setup
2:55 Question - Can you convert 3D model and get parts into Stratus from CAD? Yes!
3:50 Package Categories
5:05 Filters and Packaging for Pipe and Supports
7:45 Spool
8:45 Bring it together in a multi-trade (skid) assembly package
10:35 Dimension and Annotate multi-trade (skid) assembly package
12:08 Stratus Sheet
13:35 Filter for Loose Pipework
15:14 Edit Package Details Template and View Styles to include Add Loose Pipework Report and Viewports
19:00 Automate Rack Packages using Deliverables
21:04 Question - How do you change templates from assemblies to Stratus Sheet?
24:36 Question - How do you setup naming and numbering for best results

07/23/2020 - Ask the Experts!

2:05 Individual vs. Generic Licenses
3:35 How to Sort BOM Pipe, Fittings, and Valves
10:03 How to add Level with Automatic Package Naming
14:32 How to create Deliverables based on Level
16:16 PDF Rendering
16:48 Master Report Uses Individual Sub-report Templates
19:56 Continuation of Project Deliverables based on Level discussion
22:36 Why and How to create a Report Filter Grouping
32:58 Grouping Filter for Revit by Category, Family, Type

07/16/2020 - Project Role Setup/Interface

0:21 Admin > Company > Settings > Project Roles
1:45 Project Roles are assigned to users at the project level
2:42 Desktop > Publish
4:24 Models > Viewer > Filters
5:30 Models > Viewer > Display Modes
5:43 Assemblies > Dashboard
6:00 Assemblies > Viewer > Numbering & Dimensions
6:44 Packages > Categories - High-level permissions as to what a user can see
8:05 Processors - High-level permissions as to what a user can do
9:51 Tracking Statuses - Granular permission as to what a user can view at the assembly and package level.
12:00 Test project role permissions under Account > Company > Override Project Roles for Testing

07/09/2020 - Setting up “Tracking Statuses” for best results!

Definitions
0:42 Tracking Status, Can Assemble, Can Package, Can Number, Can BOM, Can Cut List
2:00 Applies to Package, Applies to Assembly, Applies to Part
3:12 Office, Purchasing, Shop, Field Tracking Status Groups Processor Categorization
3:56 Description, Color, Warning, Delete

Relation Between Tracking Statuses and Column Settings Using Customer Success
4:35 Design - Top Tracking Status, post-publish
5:32 Modeled
5:51 Packaged
5:58 Spooled
6:05 Material Ordered
6:42 Can Number
7:53 Materials Ordered and Joint Complete
8:15 Place Holder Geometry + Warning
9:02 On Hold + Warning

Examples
9:34 Create New Tracking Status + Project Roles Access
10:55 Apply Tracking Status in Models Viewer
12:00 Tracking Status Display Modes
12:20 Prevent Actions based on Tracking Status settings
15:00 Placeholder and On Hold with Warnings
15:49 Spool Breaks
17:40 Revit Tracking Status on Import

07/02/2020 - Stratus for the field user!

1:00 How to override your project role for testing.
1:50 Tracking Status of Packages and Assemblies - Display Modes
2:44 Gear Settings
3:00 Assembly Selection
3:22 Multiple Part Selection
4:00 Filters
4:48 Run a BOM Report
6:00 Part Properties and Part Templates
7:00 Shop Drawing Dimensions, Elevations, Tags, Spool Tags
7:34 Grid and Grid Offset Measurement Tools
10:06 Spool Tags
10:45 Where is spool in the model?
11:49 Assembly Properties QR Code to update status
13:02 Scan QR Code with a phone video

06/25/2020 - Ask The Experts!

2:00 Strongback rack support systems
3:00 Model worksets performance
4:00 Multi-trade Packaging/Spooling
12:00 sPoint for Revit (Hangers)
17:40 Master Report
19:30 Spool Checker Edited Length on Report
29:52 Weld Tracking and Editable Fields

06/11/2020 - Spooling and the Assembly Viewer

01:36 Package in Can Assemble Tracking Status
02:04 Create Assembly
07:00 Assemblies Viewer
07:50 QR Code Scan Options
08:25 Rename Assembly
08:40 Admin > Naming and Numbering (Naming Conventions)
08:10 Toggle Orientation
09:50 Tracking
11:45 Settings Gear
13:10 Stratus Toolbar
13:20 Display Mode
13:41 Filters, Grid Offset Measurement, Display Grid
14:10 Admin > Item Numbering and Can Number Tracking Status
17:30 Admin > Naming and Numbering (Numbering Rules, Numbering Schemes)
18:50 Admin > View Styles
19:22 Admin > Project Roles
19:43 Tags and Notes
22:20 Dimensioning
23:20 Linear Placement Measurement Tool and Node Options
25:10 Spool Checker and Adjusted Cut Length
27:15 Parts Tab - Send to Tool
27:58 Parts Reports and Assembly Filter
29:39 Stratus Sheet Tab

06/04/2020 – Fab Stickers! For more than just pipes!

00:48       ZPL Emulator, GTP Stratus Workstation Installers, and Tools
02:05       Hanger Sticker Example
03:10       A Sticker is just a report printed on a sticker!
04:00       Create the Hanger Sticker Example Report
06:20       Stratus.Part.Point.AFF Field
08:40       Labelary tool
09:34       Sticker fields must be a Report Field AND in the Label Template
10:36 ZPL Syntax
15:44 GTP Stratus TigerStop Workstation – How to group by size of rod
17:36 Rod Cut Length Field

05/28/2020 – Advanced Filtering

02:00 Overview
03:00 Groupings
04:30 Filter Group Conditions and Choosing the Best Filter Property
11:00 Alias for Size
12:00 What Format Is Your Filter Property Stored In?
17:50 Can an Alias be used to combine fields between AutoCAD and Revit? Yes!
19:10 On the Filters page, can you specify the difference between the Grouping column and the Conditions?
21:30 The Grouping "order" does matter
22:45 Use Service Type, Service, and Source, and Product Description for ITM's
24:40 Project Browser Filters
28:30 Deliverable Definitions are based on Filters that automate fabrication package generation

05/21/2020 – Ask The Experts!

01:35 How to get Revit colors to display in Stratus
02:51 How to Create a Master Report
06:25 How to Batch Spool
09:40 Best Way to Refresh Spool Sheet Iso View
13:09 How to use the Ignore Ancillaries Option
20:36 How to Manage Notes and Annotation Tags for an Assembly
25:37 How to Display BOM Length as 10'-0"
28:19 How to Work with Item Number Annotations
37:04 Can drops to Chillers, VAV boxes etc. be tracked?

05/14/2020 – Part Templates; What are they and how are they used?

1:00 Part Definition Definition Slides
3:00 Identify Template Name for a part
3:40 Review a Part Template
5:20 Configure Properties and Shared Properties
6:40 Visible and Order
9:00 Name and Display Name
10:40 Editable
11:55 Unit Label
12:25 Display Format and Storage Format
13:35 Item Number and Naming and Numbering Settings
16:20 Cut List Mappings
17:00 Consider For Cut Lists and Consider Fitting For Labels
18:10 Consider for Single-Axis Cut Lists
19:15 Consider for Multi-Axis Cut Lists
20:10 Threadolet, Weldolet, Saddle and Pipe Cuts

05/07/2020 – Hanger Prefabrication

1:45 Hanger Package
2:15 Filters for hangers
2:55 Naming and Numbering hangers based on filters
4:45 Numbering hangers in Hanger Package
5:25 Hanger Reports
6:30 Hanger Check Dimension Field
8:00 Ancillary Part Properties and Reports
13:30 ZPL Label with ancillary data
17:25 Revit Nested Families and the Build Assembly for Nested Family checkbox in Part Templates
22:30 Package BOM Report unchecking the ignore ancillaries override
23:40 Hanger Points export list using pass through tracking statuses (Ex. Release Trimble Points)

04/30/2020 – Using Fields in Stratus

04/09/2020 - Ask The Experts!

04/02/2020 - Deliverables: Super Charge Your Packaging, Spooling, And Tooling

02/27/2020 - Stratus Mechanical Implementation - The Value Of Accurate Data

Your model is a database and is only as good as the accuracy of the information
Two types of data inaccuracies
- Content (Informational) Vs Dimensional
- Both are (potentially)under your control
Content (informational)
- What kind of content you have and who manages it is a critical factor in how you manage it
- - RFA and ITM
  - Building Data/Sysque Vs self-managed
- Common issues
- - What is it? - Descriptions too generic or inaccurate
  - What size is it?
  - I can’t filter it!
- Do I fix it using Stratus or within my authoring software?
- - Conditioning data
  - - Consistently inaccurate or all over the road?
Content (Dimensional)
- Better detailing QC – Can’t hide behind fixing it at the end
- Spool checker – when to use and why
Pre-Conditioning data
- Custom Data Fields/Parameters
- - Report filters
  - Extra data

Implementation Webinars