Stratus Changelog

The Stratus Changelog details the features and enhancements included in each release.

Links to the latest Stratus AddIn and other Stratus software is available on the Installation of GTP Software on Windows article which includes links to:

• GTP Software Installers (Manual)

  • Revit / AutoCAD / Fabrication Supported Versions

• WinGet Automated Installation of GTP Software

2026/08/06 - 7.7.41

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed an issue causing Packages without an assigned Tracking Status to intermittently disappear from the Packages Schedule Gantt chart on refresh.

FIXED Fixed an issue where scanning an Assembly into a Container displayed a confirmation message but the container view did not update for several minutes.

2026/08/04 - 7.7.40

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed a Cut List transmission issue that could leave lists indefinitely stuck at Sending, most commonly on the first list sent to a new station. Failed sends are now automatically retried or reset to Ready without requiring support intervention.

FIXED Fixed the BOM Mapping dropdown so Default can be selected at any time, without needing to clear the field to Empty first.

2026/07/30 - 7.7.37

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed an issue where Assembly names changed unexpectedly during Revit publish when the Stratus Is Always Right conflict resolution setting was active. Manually renamed Assemblies now persist correctly and are no longer overwritten during publish.

FIXED Fixed an issue where downloading the Package Assembly Map report as a PDF from the Stratus Sheet caused Assembly tag labels to overlap and table values to run into adjacent rows.

FIXED Fixed an issue where the dimension tool failed to capture a second snap point on certain AutoCAD plate ITMs, dropping the viewer into orbit mode instead of placing a dimension.

FIXED Fixed an issue where some nested strut parts in a hanger Package were skipped during Package renumbering and left without a part number.

FIXED Fixed an issue where the Required Date filter on the Packages Dashboard returned no results after refreshing the page or navigating between pages.

FIXED Fixed an issue where scroll position jumped unexpectedly while scrolling through the Package Dashboard.

FIXED Fixed an issue where exporting a CSV from the Assembly Dashboard caused the table to display all filtered results instead of respecting the active pagination limit.

2026/07/28 - 7.7.36

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

ADDED Added a project role, Package Dates Reset and Linking, to control access to the Reset Planning Dates and Link/Unlink Phase Calculations actions in the Packages Dashboard and Package Viewer.

Open

FIXED Fixed an issue where item number suffixes based on a Field Expression did not match the corresponding report values36hen parts were grouped under Matching Parts Get Same Item Number.

FIXED Fixed an issue causing the Assembly and Parts tables in the Package and Assembly Viewers to appear empty until scrolling or toggling a filter.

FIXED Fixed an issue where Field Expressions referencing an Assembly's container returned blank values on Assembly reports and Package dashboards.

FIXED Fixed an issue where Required Dates in Package Properties were saved with the day and month transposed for accounts using non-US date formats.

FIXED Fixed an issue where deliverables grouped by a derived family-tree property generated as a single group instead of being separated by unique value.

FIXED Fixed an issue where the "Click to select package from model" tool in Actions -> Packages was only selecting an individual part instead of the entire package.

2026/07/23 - 7.7.35

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated the Assign Parts to BIM Areas operation to display real-time progress. Progress is now shown as parts are assigned and unassigned across models.

FIXED Fixed an issue where Report Templates created before a recent update rendered incorrectly, leaving white space along the bottom and right edges of generated PDFs. Templates now retain their original layout, and editing and re-saving a template corrects its sizing automatically.

FIXED Fixed a processing error that caused some database publishes to Lightning to fail and send an erroneous failure notification, even when the data was valid.

FIXED Fixed an issue where certain tracking-related fields could not be used in a Field Expression and would fail to save. Expressions referencing these fields can now be created and saved successfully.

FIXED Fixed an issue where deleting and reassigning a Package Category could cause report fields with a similar name prefix to be renamed incorrectly. Only fields belonging to the deleted category are now renamed, leaving unrelated fields unaffected.

2026/07/20 - 7.7.34

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed an issue in Company Activities where the Select Divisions picker used a legacy flat dropdown instead of the hierarchical Divisions dropdown, making similarly-named divisions difficult to distinguish.

FIXED Fixed an issue on the Assembly Dashboard where filtering the Package column by "Empty" returned no results despite unpackaged assemblies being present. This fix also applies to the Package/Part Number column on related reports.

FIXED Fixed an issue on the Assembly Dashboard where filtering the Package column by "Empty" returned no results despite unpackaged assemblies being present. This fix also applies to the Package/Part Number column on related reports.

FIXED Fixed an issue on the Packages Dashboard where generating an MAJ or PCF file failed for certain packages, even when other packages in the same model generated successfully.

FIXED Fixed an issue on the Package Dashboard where refreshing the page caused the Job (MAJ) icon to disappear for packages with a generated MAJ.

FIXED Fixed an Assembly Dashboard reporting issue. Fields referencing the project name and number now display correctly across all rows and exports.

2026/07/16 - 7.7.33

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated auto-dimensioning for composite conduit packages and assemblies, enabling consistent dimension lines across supported bend patterns with automatic fallback for unsupported configurations.

FIXED Fixed an issue where Fish Mouth saddle parts sourced from Field Orderz produced an incorrect starting cut length (Y.Start) in PSVR cut file output.

FIXED Fixed an issue where selecting a markup in the Assembly Viewer caused the camera view to shift, moving markup text and arrows out of the visible area.

FIXED Fixed an issue where angle values with decimal precision (e.g., 22.5°) were rounded to the nearest whole number on import.

FIXED Fixed an error triggered by assigning parts to scope boxes or areas when working with large, multi-view models.

2026/07/13 - 7.7.30

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated the placement of auto-dimensions and tags on kick 90 conduit assemblies so measurements appear uniformly and extend clearly away from the assembly.

FIXED Fixed an issue where users received email notifications for Tracking Status changes on parts and packages they did not have permission to view, or when email notifications were disabled in their settings.

FIXED Fixed an issue where editing the Required Date in Properties > Planning overwrote the Shop duration with an unexpected value and altered the saved Required Date.

FIXED Fixed an issue in Shift where editing the Checked In session start or stop times produced an error and prevented the changes from being saved.

FIXED Fixed an issue where Cut List material managed by more than one station could route to the wrong station unpredictably. Material shared across multiple stations now consistently routes to the oldest station.

2026/07/07 - 7.7.29

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated auto-dimension and tag placement for back-to-back 90° conduit assemblies to follow a consistent layout regardless of orientation.

FIXED Fixed Package Dashboard filtering for the empty Shop Location value. Exports to CSV and Excel now return the correct filtered results.

FIXED Fixed a scrolling issue on the Package Dashboard that caused entries to disappear and the view to jump during scroll.

FIXED Fixed an issue where the Auto-Dimension tool failed to generate dimensions for assemblies in certain packages.

FIXED Fixed an issue where the Tracking Status logged-by user displayed the original status setter instead of the most recent user.

FIXED Fixed an issue where the Assembly dropdown in the Assemblies Viewer sorted assemblies in a different order than the Assemblies Dashboard.

FIXED Fixed an issue where properties with a Display Name Override could not be edited.

FIXED Fixed an issue where saving a Package Required Date with a day value between 1 and 12 swapped the day and month on save, causing incorrect dates to persist in the application and in Big Data and Power BI exports.

FIXED Fixed an issue where adding a Package Creation Field to a Package Category caused package creation to fail when a deleted legacy report was referenced as the Package Creation Report.

FIXED Fixed an issue where sorting a report column of fractional values ordered them alphabetically instead of numerically (for example, placing 2 before 3/4). Columns formatted as fractions now sort by their true numeric value, including when the column is hidden.

FIXED Fixed an issue in the Models Viewer and Package Viewer where properties could not be edited while in full screen mode. Editing tools now behave the same in full screen as in the standard view.

2026/07/01 - 7.7.28

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated the Auto-Dimension Routine for angled bend conduit assemblies to place properly positioned dimension lines at correct offsets from fitting intersection points, open end connectors, and bounding box extents.

UPDATE Updated the Auto-Dimension Routine for 4 bend saddle conduit assemblies to replace tag-based labels with point-to-point dimensions at correct offsets from fitting intersection points and bounding box extents.

FIXED Fixed an issue where only 10 Shift Types were visible in Admin > Company > Shift > Shift Types, with no pagination or scroll available for additional entries.

FIXED Fixed an issue where the Auto-Dimension Routine cleared existing dimensions on conduit assemblies containing couplings without placing replacements, leaving assemblies fully undimensioned.

FIXED Fixed an issue in the Add Parts dialog where enabling the Bought Out filter caused the Select column to load indefinitely without returning results or surfacing an error.

FIXED Fixed an issue where using the X button to clear a Project Name Override in Admin > Company > Projects caused the project name to appear blank throughout Stratus.

FIXED Fixed an issue on the Assembly Dashboard where filter icons shifted position when selected, causing the page layout to jump and making filters difficult to click.

FIXED Fixed an issue where new BOM Mapping line items were inserted at the top of the list instead of the bottom, which caused Stratus.part.bom.* properties to pull values from the newly added row.

FIXED Fixed a scrolling issue in Part Template Properties where setting the display to All caused the list to jump to the bottom and omit line items when scrolling back up.

FIXED Fixed an issue where the Date field was left blank on Container report labels generated in ZPL format.

FIXED Fixed an issue where the Packages Viewer report left the Package # blank on rows with quantities greater than 1.

FIXED Fixed the printer selection dropdown to exclude disabled ZPL printers from the list of available options.

FIXED Fixed a Cut List Mapping issue where setting a length property to a value referencing another field caused cut list generation to fail.

2026/06/25 - 7.7.24

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

ADDED Added the ability for company administrators to view stored SQL credentials for Big Data from the Database Connection section on the Big Data admin page. Credentials are encrypted, masked by default, and accessible to all company admins without requiring regeneration.

ADDED Added a New Feature Request link to the Stratus Help page.

FIXED Fixed an issue where analytics reports remained visible under Package > Analytics even when packages were disabled for that report in Big Data settings.

FIXED Fixed an issue where running an Ancillary Report with data broken out caused package data to be incorrectly treated as ancillary data, returning incorrect values in the Stratus.Part.PackageId/Name property.

FIXED Fixed an error that prevented Lightning catalog parts in unexpected states from being removed from a Package. Descriptive error messaging now displays when removal cannot be completed.

FIXED Fixed an issue where analytics reports remained visible under Package > Analytics even when packages were disabled for that report in Big Data settings.

FIXED Fixed an issue where creating or duplicating a Numbering Scheme failed silently when a scheme with the default name already existed, with no error message displayed.

FIXED Fixed an issue where the Admin > Company > Project Roles page displayed inconsistent role data on successive refreshes, primarily affecting companies with large numbers of project roles.

2026/06/22 - 7.7.22

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED ADDED Link Phase Calculations automatically adjusts dependent phase dates (Office, Purchasing, Shop, and Field) when the Required date changes, using Duration (days) offsets configured at the Package Category or individual package level. This release fixes a long-standing propagation issue, adds Dashboard-level toggle controls, a Default Linking column in Package Categories, and activity log entries for linking, unlinking, and date changes.

Open

UPDATE Updated Big Data settings under Admin > Company > Big Data by adding an opt-in "LastUpdatedDT" option. When enabled and a Rebuild Data run is performed, each Big Data SQL object table includes a per-row last-updated timestamp that can be used to query records modified since a specific date and time, improving the performance of incremental data syncs.

Note: Enabling this option may require updates to existing downstream reports connected to Big Data SQL views.

UPDATE Added the Models Dashboard to a multi-step confirmation process for model deletion. Users must acknowledge the action is permanent and type the model name before the deletion is enabled.

1. Click Delete.

   Open

   

2. Confirm the Model Name

   Open

   

FIXED Fixed an issue in the Assembly Viewer where dimensions placed on a Stratus Sheet were not saved and would disappear after a page refresh.

FIXED Fixed a Project Roles issue where unchecking specific permissions and saving caused the permissions to revert back to a checked state after refreshing the page.

FIXED Fixed an issue where bulk publishing ten or more assemblies could result in some assemblies arriving without parts.

FIXED Fixed a Packages Dashboard issue where CSV import created duplicate Packages despite the Package numbering being set to unique across all projects.

2026/06/16 - 7.7.18

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Improved several popup dialogs where content could extend beyond the visible screen area by adding scrolling to ensure that all content remains accessible and action buttons stay visible. Popup dialogs include:

• Models > Viewer > Add Parts to Package conflict dialog

• Models > Dashboard > Delete Model confirmation

• Assemblies > Dashboard > Select 500 assemblies > Select a Package to Modify Assembly Packages dialog

FIXED Fixed a Packages Status Board issue where navigating to the Status Board caused the page to fail to load and display as blank.

FIXED Fixed a Package Viewer issue where retagging parts caused the newly applied tags to be removed after refreshing the page.

FIXED Fixed a Package Creation issue where leaving a Tables Column Lookup field blank caused the field to populate with the ColumnLookup syntax instead of remaining empty.

FIXED Fixed a Sheet Metal Dynamic Holes issue where the publish process forced hole generation to be disabled when creating fabrication models, causing dynamic holes to not appear in Stratus.

2026/06/15 - 7.7.17

Installers:

• Stratus Addin - Optional

  • As part of a required security update for Stratus, the existing code certificates are set to expire on Tuesday, June 16th. Download the new installer version.

• Stratus Workstation - Optional

  • As part of a required security update for Stratus Workstation, the existing code certificates are set to expire on Tuesday, June 16th. Download the new installer version.

Website Changes:

• None

2026/06/10 - 7.7.16

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

ADDED Added a new Open API endpoint (/v1/project/{id}/shipping-addresses) to retrieve project shipping addresses configured in Stratus.

UPDATE Updated the Auto Dimension tool for electrical conduit offset tags and dimension line placement.

FIXED Fixed a Display Modes and Reports issue where adding assemblies to a container with an "Applies to Container only" tracking status caused the container to enter a corrupted state, preventing reports using the Container field from being selected.

FIXED Fixed an issue where packages created via Field Orderz generated duplicate STRATUS.Package.Number values despite the "Unique Across All Projects" Naming Convention setting being enabled.

FIXED Fixed an issue scanning QR Codes using a mobile device.

FIXED Fixed an issue in the Package Viewer and Assembly Viewer where selecting a part in the Viewer did not highlight the corresponding row in the Parts table, and selecting a part in the Parts table did not highlight it in the Viewer.

2026/06/04 - 7.7.14

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated the Auto Dimension tool for electrical conduit (Offsets, U-Bends, and Stub-90s) and tags to include the data teams need without requiring manual additions or removals. Improvements include:

• Ability to move dimensions that were placed with "Aligned". For example, Stub 90s, when moved - didn't maintain the desired "Linear" dimension. 

• Adds Missing Dimensions

• Removes unnecessary dimensions

Open

FIXED Fixed a Numbering Rules issue where a DoesNotEqual filter evaluated as passing when the target property key was absent from a part, bypassing the expected fallthrough to the next rule.

FIXED Fixed an issue where generating a Master Report (PDF) would stall at 100% and never complete, with no output produced and no error displayed. Report generation now completes successfully and the finished PDF appears in the attachments tab.

FIXED Fixed a Packages Dashboard > Create Package button issue where double-clicking the button submitted the form twice, creating a duplicate package without an incremented package number.

FIXED Fixed a Cut List Mapping issue where configuring the any Length Property as an alias or expression for RFA sleeve parts caused the Cuts array in the generated .PSVR file to be empty, resulting in no cut length data being sent to PypeServer.

FIXED Fixed an Avatar issue where a user's avatar did not update after a name change. Previously, the avatar continued to display the initials from the user's prior name.

FIXED Fixed an issue where linked reference files were not displaying in Stratus when models and their references were published using Revit's "Collaborate in Cloud" workflow.

FIXED Fixed a Models Viewer > Package Creation issue where the Category Abbreviation in the Package Name/Number field was not refreshing when the Category was changed in the dialog.

2026/05/31 - 7.7.12

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated the Open API for Shift by adding DurationHours (read-only) to the GET TimeSession call, with a null return when StartDT or StopDT is not set.

UPDATE Updated the Tasks dropdown to sort alphabetically.

FIXED Fixed a performance issue loading attachment previews.

2026/05/25 - 7.7.11

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated messaging when adding an assembly to a package and that assembly contains parts already belonging to another package. Messages similar to the following will display:

Open

FIXED Fixed an issue where after updating the Required date value under Packages > Viewer > Properties > Planning the value on child parts was not updated to reflect the new date.

FIXED Fixed a Package Viewer issue where running a CSV Part Report with the Show Backgrounds setting enabled caused the report to include parts from outside the selected package, resulting in inflated and inaccurate part counts.

FIXED Fixed a Packages > Viewer > Items and Assembly > Viewer > Parts table issue where scrolling a list of 500+ items was glitchy.

FIXED Fixed a Package Viewer issue where performing a bulk edit on tracking status caused one part to roll back to its previous tracking status and generate an automated comment event. With this fix users no longer have to manually edit a rolled back part tracking status.

FIXED Fixed an issue on the Packages Dashboard where filtering by the STRATUS.Model.Name column could cause the filter to fail to load.

FIXED Fixed a Package Dashboard issue where toggling a filter on or off caused the Project Name override to revert to the original project name for several seconds before updating back to the correct override value.

FIXED Fixed a Stratus Sheet issue where generating a report for a single family assembly caused data from unrelated assemblies to be included, resulting in extra pages with incorrect information. The root cause was that the family assembly was copied and placed in the model multiple times.

FIXED Fixed a performance issue for Electrical models in the Assemblies Viewer where Stratus Sheets were taking 4+ minutes to load for large assemblies (e.g. 50,000+ parts).

FIXED Fixed an issue where an assembly was editable even though it was not in a "Can Assemble" tracking status.

FIXED Fixed a TrackingStatusDate() function issue where assembly-level custom fields configured with the Date data type returned blank values in Assembly Dashboard reports.

FIXED Fixed a Containers Dashboard issue where navigating to the Dashboard tab in organizations with a large number of container rows (e.g. 30,000+) prevented the page from loading.

FIXED Fixed an issue where the 'Size' Part Property was missing from ITM 2041 parts in packages published from Field Orderz.

FIXED Fixed a Viewer Properties panel issue where an editable fields dropdown did not function for parts whose Part Template had both a Display Name Override and the Editable setting enabled.

FIXED Fixed an issue where the Generate Cut List button remained enabled after a cut list had already been generated.

FIXED Fixed an issue in the PSVR output file where the Bevel Angle was incorrectly being set to 30 instead of the value configured on the Admin > Company > Pipe Cuts page. Non-pipe RFAs with no connectors now correctly export the Pipe Cut End based on the Part Template Multi-Axis Cutlist Mapping.

FIXED Fixed the API call GET /v1/project/autodesk-projects that was throwing an error.

2026/05/12 - 7.7.9

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

UPDATE Updated Generate Deliverables behavior in Projects > Deliverables. Previously when parts were added or moved to an Area after a Deliverable had already been converted to a Package, a new Deliverable would not be generated and those new or moved parts would be orphaned. With this change, regenerating deliverables now correctly creates a new Deliverable for the new or moved parts. Note that parts already included in an existing Packaged Deliverable will not be changed.

In this example, one Deliverable has been packaged and has 10 parts and the non-packaged Deliverable has 10 parts.

Open

After 3 parts from one Area to another and clicking Generate Deliverables creates a new Deliverable in the West Sector with the 3 moved parts, while the East Area regenerates and updates to 7 parts.

Open

UPDATE Updated report filtering for Fabrication Parts ancillary data. Filters using Ancillary.Type and Ancillary.Usage now correctly return only matching ancillary items. Reports exclude non-matching items and return empty results when no matches are found.

FIXED Fixed a Package Viewer issue where selecting a markup in the Markups tab caused the camera to shift away from the markup location.

FIXED Fixed a Models Viewer > Display Modes issue where some container types did not display colors correctly.

FIXED Fixed a User Management issue where allowing creation of duplicate users with the same email address caused authentication failures, incorrect profile data, and data integrity issues when attempting to log in.

FIXED Fixed a Stratus Sheet issue where rotated text (90°) defined in the Stratus Sheet Template caused PDF exports to split into multiple pages. PDF output now correctly matches the single-page in-app preview.

2026/04/28 - 7.6.1171

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed an issue where completing an assembly task caused labels from unrelated assemblies to be printed. Labels now print only for parts belonging to the specific assembly being completed.

FIXED Fixed an issue where re-enabling a disabled Quick Pass user by adding a new user with an identical name incorrectly displayed a "User already exists" error instead of re-enabling the existing user.

FIXED Fixed a Scan tab issue where the Next Tracking Status button failed to advance to certain tracking statuses, causing the page to load indefinitely without progressing.

FIXED Fixed an issue where a user was unable to create a valid password during the reset process.

FIXED Fixed an Admin > Company > Project Roles issue where clicking the Add Project Role button, renaming or deleting existing roles did not work consistently.

FIXED Fixed a Package BOM report issue (where the report’s Item Type = BOM) did not populate values correctly.

FIXED Fixed a Task (Task Definition) issue where after completing a task under certain circumstances, the Package Division incorrectly changed.

FIXED Fixed an issue to prevent all Divisions from being unintentionally deleted under Admin > Company > Divisions.

FIXED Fixed a Containers Dashboard issue where the Name column did not sort alphabetically.

2026/04/22 - 7.6.1168

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

ADDED Big news for your whole company! The new SSA integration feature means shop fabricators, field crews, and project coordinators can access live models in Stratus without an Autodesk account, eliminating IT overhead and Stratus authentication failures for good. See the Autodesk (Admin) Knowledge Base article for BIM 360 or Forma self-serve instructions. Our legacy Autodesk user-level authentication will be removed soon. Enable SSA now to avoid disruption.

Key Benefits

• One-time setup, permanent result. Company admins complete a self-service configuration once; no ongoing credential management or per-user provisioning is required.

• Supports both ACC (Forma) and BIM 360. SSA works across both Autodesk platforms with dedicated setup documentation for each.

• Publishing workflows no longer depend on user sessions. Revit and AutoCAD publishes now authenticate via a server-side SSA token, replacing the requirement for personal Autodesk credentials on every publish.

• Faster team onboarding. New users access live project models on day one, with no Autodesk account provisioning step required before they can get to work.

2026/04/21 - 7.6.1165

Installers:

• Stratus Addin - Optional

  • FIXED Fixed an issue where certain model elements were missing properties and only visible when “Show Backgrounds” was enabled.

• Stratus Workstation - None

Website Changes:

ADDED Added the ability to delete multiple packages from the Packages Dashboard. After clicking Delete Selected a confirmation prompt will display.

Open

UPDATE Improved Big Data Sync History performance.

UPDATE Improved Master Report performance.

FIXED Fixed an issue in Package Creation where manually entered values such as the package name were not retained when selecting a different part.

FIXED Fixed an Assembly Viewer issue where duplicate parameter-based custom tags displayed in the Viewer were not appearing on the Stratus Sheet.

FIXED Fixed a Publish issue where a Revit model containing a linked file (Xref) not uploaded to the Autodesk Hub caused the publish process to fail without a clear message, requiring manual backend intervention to resolve. The system now handles missing linked files, either completing the publish with a warning or surfacing a clear, actionable error identifying which linked file is missing.

2026/04/15 - 7.6.1164

Installers:

• Stratus Addin - Optional

  • FIXED Fixed an issue in Model Viewer where the Show Backgrounds checkbox did not display linked files or references for models published with external links.

• Stratus Workstation - None

Website Changes:

UPDATE Improved performance of the Package Viewer when applying multiple filters to prevent slowness and freezing.

UPDATE Updated Packages CSV export to include two rows for the column header name. Row 1 is the full Stratus property path (e.g., Stratus.Package.Description) for each column, and Row 2 is the friendly report header row.

Open

As a result, the Import CSV process will read row 1 of the uploaded file and use the full Stratus property names to identify which package fields to update and enables Import CSV to correctly update all editable fields.

See the Packages Dashboard > Import CSV article for more information.

FIXED Fixed a Container Details Report error that prevented the report from running when executed within a specific container.

FIXED Fixed the Container Assign tab issue so it loads reliably for large containers, eliminating timeout errors and incomplete request failures.

FIXED Fixed Package Naming Convention issue where fields (e.g., BIM Area Abbreviation, Fabrication Service Abbreviation) were empty during the package creation process.

2026/04/08 - 7.6.1163

Installers:

• Stratus Addin - None

• Stratus Workstation - None

Website Changes:

FIXED Fixed an issue where CSV/Excel downloads from the Package Dashboard failed to complete due to errors during the download process.

FIXED Fixed a Publish issue where error messages during element extraction displayed the element's UniqueId instead of the Revit Element Id, making it difficult for users to locate the affected element in their model.

FIXED Fixed an issue where pressing the Tab key during Package Creation skipped over fields with predefined possible values instead of advancing to them sequentially.

FIXED Fixed a Publish issue where canceling a model publish stopped the process but left the model in a locked state, requiring a Service Desk ticket to unlock.

FIXED Fixed an issue where Autodesk Construction Cloud (ACC) models using Revit 2024, hosted by a third-party contractor, and saved to a network location failed to publish to Stratus. Users can now publish these models successfully without creating a detached local copy.

FIXED Fixed an issue where the Areas filter did not load in the Model Viewer. In addition, a part loading progress indicator was added to the Filter window.

Open

FIXED Fixed a Package Viewer issue ensuring that Viewer content is now scoped correctly to the selected package instead of loading the full model.

2026/04/01 - 7.6.1160

Installers:

• Stratus Addin - None