Skip to end of banner
Go to start of banner

Labels, ZPL Printers, and Code

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Printer Model

Label Width

DPI

Notes

ZD421 Desktop Printer

Direct Thermal: 0.585 in./15 mm to 4.25 in./108 mm
Thermal Transfer Roll: 0.585 in./15 mm to 4.41 in./ 112 mm
Thermal Transfer Cartridge: 0.585 in./15 mm to 4.65 in./118 mm

203; 300

Simple, Cheaper than others

No Screen version of ZD621

ZD621 Desktop Printer

Direct Thermal: 0.585 in./15 mm to 4.25 in./108 mm
Thermal Transfer: 0.585 in./15 mm to 4.65 in./118 mm

203; 300

Has a Screen for modifying printer settings.

ZT610 Industrial Printer

Direct Thermal:
8.7 in./ 221 mm L x 7.0 in./177 mmW x 5.9 in./151 mm
Thermal Transfer:
10.5 in./267 mm L x 8.0 in./202 mm W x 7.5 in./ 192 mm H

203; 300; 600

Direct Thermal Labels

Printer(s)

Durability

Notes

Z-Select 4000D
(Spec. Sheet)

ZD421d;
ZD621d;
ZD421t;
ZD621t;
ZT610

Medium

No direct exposure to welding, sunlight or other UV light sources

Scratch Resistant; can be torn

Z-Select 2000D Label
(Spec. Sheet)

ZD421d;
ZD621d;
ZD421t;
ZD621t;
ZT610

Low

No direct exposure to welding, sunlight or other UV light sources

Label can be easily damaged in a shop environment

Thermal Transfer Labels

Printer(s)

Ribbon

Durability

Notes

PolyPro 3000T Matte
(Spec. Sheet)

ZD421t;
ZD621t;
ZT610

High

Hard to tear/scratch

Z-Ultimate 3000T
(Spec. Sheet)

ZD421t;
ZD621t;
ZT610

Extreme

Hardest to tear/scratch

Z-Ultimate 4000T
(Spec. Sheet)

ZD421t;
ZD621t;
ZT610

Extreme

Hardest to tear/scratch

Label Type

Picture Of Label

Label Report and Fields

ZPL Code

Pipe Label

4” x 2” Label

 203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0

^FO30,15
^FDGTP STRATUS^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FX COMMENT: Position at 140, 10 on label and print item number ^FS
^FO30,80
^FDPackage Name: {{STRATUS.Part.PackageName}}^FS

^FO30,110
^FDAssembly Name: {{STRATUS.Part.AssemblyName}}^FS

^FO30,140
^FDSize: {{Size}}^FS

^FO30,170
^FDMaterial: {{Material}}^FS

^FO30,200
^FDLength: {{STRATUS.Part.CutLengthFeetAndInches}}^FS

^FO30,230
^FDItem #: {{STRATUS.Part.Number}}^FS

^FO30,260
^FDEnd 1: {{C1}}^FS

^FO30,290
^FDEnd 2: {{C2}}^FS

^FO30,320
^FB550,16,0,L
^FDHole Info:\&{{STRATUS.Field.Hole info for ZPL Label}}^FS

^FX COMMENT: Position at 15, 10 on label and print QR code ^FS, USE M as Standard Quality QR Code
^FO590,180
^BQN,2,7^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Pipe Label

4” x 2” Label

 203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size ^FS
^CF0,60

^FWR ^FX COMMENT: Rotate all following fields 90 degrees clockwise ^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0

^FO730,30
^FDGTP STRATUS^FS

^CF0,30

^FO700,30
^FDPkg: {{STRATUS.Part.PackageName}}^FS

^FO670,30
^FDAssembly: {{STRATUS.Part.AssemblyName}}^FS

^FO640,30
^FDSize: {{Size}}^FS

^FO610,30
^FDMaterial: {{Material}}^FS

^FO580,30
^FDLength: {{STRATUS.Part.CutLengthFeetAndInches}}^FS

^FO550,30
^FDItem #: {{STRATUS.Part.Number}}^FS

^FO520,30
^FDEnd 1: {{C1}}^FS

^FO490,30
^FDEnd 2: {{C2}}^FS

^FO10,30
^FB400,16,0,L
^FD{{STRATUS.Field.Holeinfo for ZPL Label}}^FS

^FX COMMENT: Position for QR code and rotate it 90 degrees ^FS, USE M as Standard Quality QR Code
^FO20,20
^BQN,2,7R^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0
^FWN

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Hanger Label

4” x 6” Label

 203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28
^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWN

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0

^FX COMMENT: Set default font size ^FS
^CF0,80

^FX COMMENT: At 80 font this is more or less centered ^FS
^FO30,569
^FD{{STRATUS.Part.ProjectNumber}} {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,60

^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWR

^FO720,150
^FDAssembly^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO625,10
^GB75,500,6,B

^FS
^FO426,10
^GB205,500,6,B

^FS
^FO226,10
^GB205,500,6,B

^FX COMMENT: Set default font size ^FS
^CF0,50

^FO630,20
^FDNumber: {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FO140,20
^FB500,10,20,L
^FD{{STRATUS.Field.Frank Hanger Assembly Info}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,60

^FO720,775
^FDInstallation^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO625,700
^GB75,500,6,B

^FS
^FO426,700
^GB205,500,6,B

^FS
^FO226,700
^GB205,500,6,B

^FX COMMENT: Set default font size ^FS
^CF0,50

^FO630,720
^FDNumber: {{Item Number}}^FS

^FX COMMENT: Set default font size ^FS
^CF0,30

^FO140,720
^FB460,10,20,R
^FD{{STRATUS.Field.Frank Hanger Install Info}}^FS

^FX COMMENT: Position at 20,200 on label and print QR code ^FS, USE H as High Quality QR Code
^FO20,200
^BQN,2,6^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: Position at 20, 800 on label and print QR code ^FS, USE H as High Quality QR Code
^FO20,800
^BQN,2,6^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: This sets the "Home" coordinate best practices is to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift entire label ^FS
^LH0,0
^FX COMMENT: FWR rotates text 90 degrees ^FS
^FWN

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Decoiled Straights

4” x 3” Label

 203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size for header ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift the entire label ^FS
^LH0,0

^FO30,15
^FDGTP STRATUS^FS

^FX COMMENT: Set default font size for section headers ^FS
^CF0,50

^FO30,80
^FDDecoiled Straight^FS

^FX COMMENT: Set default font size for body text ^FS
^CF0,40

^FO30,130
^FDPackage Name: {{STRATUS.Part.PackageName}}^FS

^FO30,170
^FDAssembly Name: {{STRATUS.Part.AssemblyName}}^FS

^FO30,210
^FDProject: {{STRATUS.Part.ProjectNumber}} - {{STRATUS.Part.ProjectName}}^FS

^FO30,270
^FDSize: {{Size}}^FS

^FO30,310
^FDMaterial: {{Material}} ({{MaterialGauge}})^FS

^FO30,350
^FDLength: {{STRATUS.Part.CutLengthFeetAndInches}}^FS

^FO30,390
^FDItem #: {{STRATUS.Part.Number}}^FS

^FO30,437
^FDEnd 1: {{C1}}^FS

^FO30,477
^FDEnd 2: {{C2}}^FS

^FO30,517
^FDSeam 1: {{S1}}^FS

^FO30,557
^FDSeam 2: {{S2}}^FS

^FX COMMENT: Set default font size for QR code section ^FS
^CF0,30

^FO550,350
^BQN,2,7^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO20,425
^GB310,180,6,B

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift the entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Spiral Straights

4” x 3” Label

 203 DPI Label code click here

^XA
^FX COMMENT: XA Opens the code for the label ^FS

^FX COMMENT: Use Unicode font ^FS
^CW0,ANMDJ.TTF^CI28

^FX COMMENT: Set default font size for header ^FS
^CF0,60

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift the entire label ^FS
^LH0,0

^FO30,15
^FDGTP STRATUS^FS

^FX COMMENT: Set default font size for section headers ^FS
^CF0,50

^FO30,80
^FDSpiral Straight^FS

^FX COMMENT: Set default font size for body text ^FS
^CF0,40

^FO30,130
^FDPackage Name: {{STRATUS.Part.PackageName}}^FS

^FO30,170
^FDAssembly Name: {{STRATUS.Part.AssemblyName}}^FS

^FO30,210
^FDProject: {{STRATUS.Part.ProjectNumber}} - {{STRATUS.Part.ProjectName}}^FS

^FO30,270
^FDSize: {{Size}}^FS

^FO30,310
^FDMaterial: {{Material}} ({{MaterialGauge}})^FS

^FO30,350
^FDLength: {{STRATUS.Part.CutLengthFeetAndInches}}^FS

^FO30,390
^FDItem #: {{STRATUS.Part.Number}}^FS

^FO30,437
^FDEnd 1: {{C1}}^FS

^FO30,477
^FDEnd 2: {{C2}}^FS

^FO30,517
^FDSeam 1: {{S1}}^FS

^FX COMMENT: Set default font size for QR code section ^FS
^CF0,30

^FO550,350
^BQN,2,7^FDHA,{{STRATUS.Part.QRCode}}^FS

^FX COMMENT: Draws a box with length of 75, width of 500 and line thickness of 6 ^FS
^FO20,425
^GB310,142,6,B

^FX COMMENT: This sets the "Home" coordinate; best practices are to reset this to 0,0 at the start and end of each ZPL code in STRATUS. This can be used to shift the entire label ^FS
^LH0,0

^FX COMMENT: XZ Ends the code for the label ^FS
^XZ

Material

Label Recommendation

Carbon Steel/Stainless Steel Pipe 2-1/2” and Larger

  • Label Type -
    PolyPro 3000T
    Z-Ultimate 3000T
    Z-Ultimate 4000T

  • Label Size
    4” x 3”

Carbon Steel/Stainless Steel Pipe 2” and Smaller

  • Label Type -
    PolyPro 3000T
    Z-Ultimate 3000T
    Z-Ultimate 4000T

  • Label Size
    4” x 2”

Printing Labels Troubleshooting Steps

Sometimes if you install your ZPL printer directly from Windows, it won't work. If this is your situation (the ZPL won't print), consider the following steps:

  1. Install the ZPL Setup Utility https://www.zebra.com/us/en/support-downloads/printer-software/printer-setup-utilities.html

  2. Install your ZPL printer drives from the Zebra Setup Utility

  3. In Windows under Printers (see image below) 

    1. Uninstall your ZPL printer

    2. Then, using the Zebra Setup Utility, reinstall your printer

    3. set your ZPL printer as the default printer.

  1. In Windows, under Printers, uninstall all unwanted printers from computer (many times, printing issues involve conflicting printer and print drivers).

  • No labels

© Copyright 2022 GTP Services, LLC All rights reserved. | About | Contact