The GTP Customer Success Team offers Implementation and Q&A webinars.

Registration:

Register for the CSG Webinar series at 12 PM EST After registering, you will receive a confirmation email containing information about joining the webinar.

Table of Contents

Recordings:

11/02/2023 STRATUS Release Review + Ask The Experts Webinar

10/25/2023 Alterman's Success Story: STRATUS Powered Digital Workflows for Electrical Contractors

9/28/2023 Label It with STRATUS

9/21/2023 Using Field Orderz to Eliminate Paper Workflows with Tweet-Garot

8/31/2023 STRATUS Updates And Ask The Experts

6/23/2023 STRATUS Innovate 2023 Preview Hosted by the Construction Dorks

6/1/2023 STRATUS New Numbering Workflows in STRATUS

5/18/2023 STRATUS Updates And Ask The Experts

5/04/2023 Your Digital Twin in STRATUS: Understanding Shared Parameters and Fabrication Content

3/09/2023 The Power of Fields in STRATUS (Strategies from STRATUS Pulse Series)

10/27/2022 CSG Webinar: Accessing the STRATUS API for Project Tracking and Analytics

10/06/2022 CSG Webinar: Package Planning-Scheduling with the Dashboard and Gantt Chart

Four Piping Solutions with Field Orderz Webinar

Duct Solutions with Field Orderz Webinar

How MEP Contractors Can Prepare for CMMC 2.0 Compliance _ Hosted by Terry Humphries with Special Guest Nick Espinosa

06/23/222 CSG Webinar: Integrating Containers into Your Shop

03/24/222 CSG Webinar: STRATUS Updates And Ask The Experts Webinar

03/10/222 CSG Webinar: How to Start Weld Tracking in STRATUS

02/24/222 CSG Webinar: STRATUS Updates And Ask The Experts Webinar

01/20/22 CSG Webinar: STRATUS Updates And Ask The Experts Webinar

01/06/22 CSG Webinar: Get Your Material Take Off On Demand and Digital

04/30/21 CSG Webinar: What's New In The Zoo?

00:00 Review of new features released in 2021 to date

04/16/21 CSG Webinar: GTP Cut Application

00:00 Release Notes Review
02:20 Download GTP STRATUS TigerStop Workstation
03:00 Settings - General
11:45 Settings - TigerStop
15:00 Questions about TigerStop Automated Cutting
18:15 Admin > Tools > Label Template
19:30 Using the GTP STRATUS TigerStop Workstation application

04/09/21 CSG Webinar: Advanced Filtering

00:00 Release Notes Review
06:40 Filters vs. Groupings
11:00 Project Data Fixer Filter
13:30 Filters with Model Viewer Checked
16:30 Filter Conditions for Mains and Olets

04/02/21 CSG Webinar: STRATUS In-Depth Series, The Assemblies Module

00:00 Introduction and Release Notes
11:00 Filter Spools
13:00 Can Assemble Tracking Status
13:30 Rename Assembly
13:55 Scan QR Code to display Assemblies Viewer page
15:00 Toggle Assemblies View for Tablets
16:20 Display Mode Tool
15:50 Grid Offset Measurement Tool
17:20 Explode Model Forge Tool
18:00 Numbering Tool
19:30 Annotation Tags Tool
22:15 Custom Notes
23:10 Attachments
24:30 Dimensioning Tool
31:00 Save Default Extensions Tool
32:30 Find Part
33:00 Spool Checker Tool

03/25/2021 CSG Webinar: Leveraging Groupings In Your Filters

00:00 Release Notes Review
05:40 Groupings Are Applied to Filters
07:30 Project Fixer Filters
18:40 Apply Grouping to Filters used in the Models Viewer
20:00 Grouping Examples

03/18/2021 CSG Webinar: View Styles For PDF Templates

00:00 Release Notes Review
03:15 View Styles Linked to Templates
04:30 View Styles Configuration
05:30 Render, Appearance, Visibility Examples
12:00 Part, Dimension, Tag Visibility Examples
18:00 Line Weights, Fonts, Arrowheads
25:25 Item Number - Leaders, Arrowheads, Background Bubble Color

03/11/2021 CSG Webinar: Setting Up PDF Templates

00:00 Introduction
02:20 Relationship Between a Report and a Template
4:10 Template Types
10:15 Assemblies Viewer Template
14:20 Title Block
19:50 Multiple Page Templates
31:30 Questions

03/04/2021 CSG Webinar: Deliverables

00:00 Introduction
02:50 Projects > Deliverables
9:45 Deliverable Definitions
14:00 Verify Filters in Models > Viewer
17:45 Projects > Deliverables Settings
24:00 Generate Deliverables
26:00 Generate Packages
33:00 Recap
35:40 Release Notes Review

02/25/2021 CSG Webinar: Setting Up Project Roles

00:00 Release Notes Review
05:00 Project Roles
20:50 Tracking Status and Processors

02/18/2021 CSG Webinar: Advanced Label Creation

00:00 Release Note Review
09:10 Label Introduction
13:50 Cut List Label - Fields and Tools
20:55 Cut List Label - Add Logo
24:00 ZPL Report Label
31:45 Formatting Label
38:30 Print Emulator and GTP STRATUS Print

02/11/2021 CSG Webinar: Naming And Numbering

00:00 Release Note Review
05:00 Admin > Company > Naming and Numbering > Naming Conventions
15:50 Admin > Company > Naming and Numbering > Numbering Rules
18:30 Admin > Company > Naming and Numbering > Numbering Rules > Matching Parts Get Same Item Number
21:00 Admin > Company > Naming and Numbering > Numbering Schemes
28:00 Admin > Project > Settings
29:30 Questions

01/28/2021 CSG Webinar: STRATUS In-Depth Series, The Packages Module

00:00 Release Note Review
04:00 Packages Default - Tab
05:55 Packages Dashboard - Filters
08:05 Packages Dashboard - Force Refresh of Calculated Fields
09:05 Archive
10:00 Packages Dashboard - Download CSV
11:20 Packages Schedule
12:10 Packages Status Board
12:35 Status Hierarchy
15:00 Package Details
16:30 Package > Viewer > Filter
20:00 Package > Naming and Numbering
22:30 Package > STRATUS Sheet
30:40 Package > Properties
32:10 Package > Items
34:10 Package > BOM
44:10 Package > Cut List
47:00 Package > Point List
52:50 Package > Notes
54:30 Package > Attachments
54:20 Packages Dashboard - MAJ File
56:40 Package > Tracking

01/21/2021 CSG Webinar: STRATUS In-Depth Series, The Models Module

00:00 Release Note Review
03:00 Models Dashboard
06:20 Models Viewer
07:10 Models Viewer - Cache
07:55 Models Viewer - Gear Options
10:30 Models Viewer - Autodesk Toolbar and Settings
16:50 Models Viewer - Display Modes
20:10 Models Viewer - Filters
23:10 Models Viewer - Actions
26:10 Models Viewer - Window Select
26:50 Models Viewer - Select Connect
28:00 Models Viewer - Properties
28:10 Models Viewer - Display Grid
32:10 Questions

01/14/2021 - STRATUS Purchasing Tab: What is it and how do I use it?

01/07/2021 - Production Tracking

02:05 Custom Package Dashboard
05:10 Fabrication Earned Hours
07:30 Tracking Status Parent / Child Relationship
13:35 Spool Tracking with a monitor in the shop
18:00 Spool Tracking Using Scan tab
22:00 Update Fabrication Earned Hours
25:30 Actual Hours Complete
34:50 Task Definitions

12/17/2020 - Ask The Experts!

02:00 Ancillary Cut List
10:05 How to get model color views in STRATUS?
12:39 How to get the Total Length of Pipe in a BOM Report when there is a text suffix?
15:00 Cut List Override
23:30 View Templates

12/10/2020 - Publishing from Revit and AutoCAD best practices

12/03/2020 - Leveraging your data with Fields

11/25/2020 - Hanger And Support Spooling/Fabrication Workflows

01:00 Prefabrication Filters and Package
03:15 Packages Dashboard
04:00 Renumber Hangers with Filters
06:00 Part Template Item Number
12:15 2 Ways to Communicate with the Field 1. Print Drawing 2. Stickers
12:35 Print Drawing - Package Details Report with QR Codes
15:45 Package Cut List Grouped by Rod Size Using Field to Determine Cut Length
21:00 Station Managed Materials
24:30 STRATUS Cutting Workstation (TigerStop) and Sticker
27:30 Centerline and Bottom Elevation Sticker Data
30:00 Single Rod Hanger Standard Length Sticker

11/19/2020 - Electrical Spooling/Fabrication Workflows

00:00 Introduction
05:00 Setting: Use Parameters Mapping for Assembly Import and Publish
07:30 Groupings and Filters
13:30 Underground Package
14:40 Task Definitions
19:50 Generate Tasks Based on Tracking Status
22:30 Shops and Tasks Tabs
30:00 Stations - Assign to Station
31:00 Package Tasks and Assembly Tasks
38:00 Settings: Publish Greenlee BendWorks Assemblies
43:00 Settings: Generate Tasks

11/12/2020 - Ask The Experts!

00:25 Webinar Announcement: Paper? Where we're going, we don't need paper.
01:40 Q: Spool Map on STRATUS Sheet
12:15 Q: Project Roles - Save Default Extensions
14:20 Q: Project Roles - View STRATUS Sheet
17:50 Q: Settings Create Spool Drawings During Import + Publish Spool Drawings
21:40 Q: API Example

11/05/2020 - Sheet Metal Spooling/Fabrication Workflows

01:30 Filters
03:55 Create Packages
06:00 Packages Dashboard
07:50 Numbering Rules and Filters
13:00 Spools
16:30 How to Cut Holes in Duct
19:00 Assemblies Viewer
23:20 BOM with Ancillaries
26:06 Generate MAJ File
27:00 Notes
30:00 Dimensioning
33:20 CAMDUCT / MAJ File
36:00 Fabrication Data from STRATUS
37:50 Labels
39:50 Filter Packages and Assemblies / Spools

10/29/2020 - Carbon Steel Grv Spooling/Fabrication Workflows

01:20 Approaches to Victaulic Fabrication
02:00 Spool Victaulic Fabrication
08:10 Spool Map and Loose Fittings
14:18 View Template
19:10 Why do you have duplicate VDC packages and Fab packages?
28:13 PypeServer - Part Templates > Cut List Mapping
30:55 How do you label the plain end?
36:50 When do you adjust the cut length?

10/22/2020 - Ask The Experts!

00:54 New Feature: Ability to Rollback and Re-Publish a Model
02:46 Limiting Access to Project Roles
07:54 Quickest way to add users to multiple projects
09:54 BOM Purchasing Process
26:20 Batch Printing PDF for Spools
27:40 Create Master Report the lists all assemblies as individual BOM's
34:42 Cut List Status

10/15/2020 - Carbon Steel BW Spooling/Fabrication Workflows

00:00 Filter and Package
04:35 Package BOM Linear Nesting
07:13 Assembly Viewer Report and Numbering
09:05 Drill down into Naming and Numbering - Numbering Rule
10:00 Numbering Scheme - Apply Numbering Rules
10:25 Weldages Report - Edit Weld ID, Heat Number, and Notes
13:45 Custom Data Field or Revit Parameter
14:50 Part Template - Editable Weld Properties
16:30 Weld Map View Style
19:10 Validate Cut Information .psvr file - Send to Tool
21:00 JSON Formatter Validator
23:10 Pipe Cut Configuration
26:00 Pattern 2875 - Part Templates > Cut List Mappings > Consider for Multi-Axis Cut Lists
30:45 Tips and Tricks - Track Field Welds vs Shop Welds

10/08/2020 - Cast Iron NH Spooling/Fabrication Workflows

00:25 Methodology: Kit or Spool
01:14 Method 1: Kit and Send
04:16 Naming and Numbering
05:50 STRATUS Sheet
09:29 Method 2: Spool and Assemble
13:44 Naming, Numbering, and Annotation
14:20 BOM
18:33 Cut List
19:15 Material Alias
21:51 Automatically apply Material Alias to Cut List at Station
29:27 Send Cut List to Station - GTP STRATUS Workstation (TigerStop App)
30:40 Label and Connected To Data Shop vs. Field

10/01/2020 - Copper Piping Spooling/Fabrication Workflows

00:00 Introduction
00:42 Workflow Diagram
01:30 Filer Copper in Models Viewer to Create Package
03:37 Question: How are Areas Created?
05:40 Create Package
07:25 Packages Dashboard
08:00 Method #1 - Generate BOM Report via Packages > Attachments > Report
09:00 Method #2 - Generate BOM Report via Packages > BOM
11:10 Create Spools
17:25 Create Packages > Cut Lists
18:35 Admin > Company > Part Templates > Cut List Mapping > User Data
20:39 Admin > Company > Materials
21:04 Admin > Company > Stations - Automatically selected the Station based on Material
25:40 Send Cut List to Station
26:05 Cut List in GTP STRATUS Workstation (TigerStop)
28:18 Labels

09/24/2020 - Ask The Experts!

00:32 How to prevent items with same CID from display in Cut List?
03:35 How to Generate Cut List Mapping for Trapeze hangers?
08:15 What is the difference between the Place Linear Length Measurement tool and the Place Aligned Length Measurement tool?
14:42 How to use UserData1 and UserData2 to get data on a Label?
18:46 How to wrap text on a label?
21:40 How to generate Bill of Lading report for a Container?
26:21 Has STRATUS been slow lately?
27:31 Is Firefox or Chrome faster?

09/17/2020 - Package BOM Interface

00:00 Introduction
01:10 Packages Dashboard
01:37 Traditional BOM Report (Limited)
02:30 Packages BOM tab
03:20 Generate BOM
04:17 Linear Nests
05:43 BOM Line Item Override
08:44 Nominal Stock Length
10:00 Auto Linear Nest
12:03 Hide Columns
12:47 Default Report
15:23 Non-modeled BOM Items
16:14 Exclude Line Items
17:34 Ancillaries
25:18 Revit Ancillaries

09/10/2020 - Containers

00:16 Containers Introduction
00:51 Containers Setup - Admin > Company > Containers
04:15 Containers Module
07:48 Package Viewer > Filters > Containers
10:07 Container Contents Report
11:05 Container within a Container
14:04 Container and Container Children Tracking Statuses
17:01 Scan Module
20:35 How can I ship multi-trade racks?
20:45 Would I setup a job site as a Container?

09/03/2020 - Multi-Axis Pipe Cutter

02:05 Database Settings Fabrication CADMep
04:34 Connectors
05:28 What do I do if the model is drawn but doesn't have material information? UPDATEFROMSOURCE command
06:49 STRATUS Pipe Cuts
08:55 RFA and Part Templates > Cut List Mapping
11:20 Saddles, Olets, Connectors and Part Templates > Cut List Mapping
16:37 RFA Saddles, Olets, Connectors Saddles
17:39 Validate .PSVR File Data with JSON Formatter
20:25 Direct Integration .3DPP or PypeServer
23:30 API Integration

08/27/2020 - Deliverables

00:35 Deliverables Definition
01:00 Setup Company Filters
03:25 Setup Company Deliverable Definitions
04:19 Setup Company Naming and Numbering > Package Naming
05:04 Setup Company Package Categories
05:30 Setup Project Areas
07:20 Setup Project Deliverables
11:33 Generate Project Deliverables
14:04 Create Packages

08/13/2020 - Using your TigerStop with STRATUS!

00:00 Cut List Introduction
01:22 Can Cut Tracking Status
02:28 Generate Cut List for a Package - Package's Cut List tab
03:35 Generate Cut List for a Part - Assembly Viewer
04:29 Pipe - Part Templates > Cut List Mappings
08:27 Hanger Rod - Part Templates > Cut List Mappings
12:47 Tool and Station Setup
13:54 Send Package Cut List to Station
14:19 TigerStop Station and General Workstation Settings
25:52 TigerStop Station and Filtering Projects, Models, Packages, Assemblies, Grouping
24:52 TigerStop Station and TigerStop Workstation Settings
27:46 Use the TigerStop Workstation for non-TigerStop workflows
28:54 TigerStop Workstation Dynamic Nesting
30:09 Labels for Different Tools

08/06/2020 - Setting up “Naming And Numbering” for best results!

0:33 Admin > Company > Naming and Numbering
1:51 Adimn > Company > Settings > Item Numbering
4:23 Numbering Rules and Part Filters
10:19 Admin > Company > Part Templates - Matching parts get same number
14:28 Admin > Company > Naming and Numbering > Naming Conventions
21:26 Admin > Company > Naming and Numbering > Numbering Schemes
26:22 Admin > Project > Settings > Item Number to set numbering by project
27:18 Question: How to not number a part?
29:46 Question: How to autonumber parts of assemblies created in Revit?

07/30/2020 - Multi-Trade racks/skids in STRATUS!

0:15 Modular - Multi-Trade racks, skids, something to assemble
1:25 Limitations
2:30 Setup
2:55 Question - Can you convert 3D model and get parts into STRATUS from CAD? Yes!
3:50 Package Categories
5:05 Filters and Packaging for Pipe and Supports
7:45 Spool
8:45 Bring it together in a multi-trade (skid) assembly package
10:35 Dimension and Annotate multi-trade (skid) assembly package
12:08 STRATUS Sheet
13:35 Filter for Loose Pipework
15:14 Edit Package Details Template and View Styles to include Add Loose Pipework Report and Viewports
19:00 Automate Rack Packages using Deliverables
21:04 Question - How do you change templates from assemblies to STRATUS Sheet?
24:36 Question - How do you setup naming and numbering for best results

07/23/2020 - Ask the Experts!

2:05 Individual vs. Generic Licenses
3:35 How to Sort BOM Pipe, Fittings, and Valves
10:03 How to add Level with Automatic Package Naming
14:32 How to create Deliverables based on Level
16:16 PDF Rendering
16:48 Master Report Uses Individual Sub-report Templates
19:56 Continuation of Project Deliverables based on Level discussion
22:36 Why and How to create a Report Filter Grouping
32:58 Grouping Filter for Revit by Category, Family, Type

07/16/2020 - Project Role Setup/Interface

0:21 Admin > Company > Settings > Project Roles
1:45 Project Roles are assigned to users at the project level
2:42 Desktop > Publish
4:24 Models > Viewer > Filters
5:30 Models > Viewer > Display Modes
5:43 Assemblies > Dashboard
6:00 Assemblies > Viewer > Numbering & Dimensions
6:44 Packages > Categories - High-level permissions as to what a user can see
8:05 Processors - High-level permissions as to what a user can do
9:51 Tracking Statuses - Granular permission as to what a user can view at the assembly and package level.
12:00 Test project role permissions under Account > Company > Override Project Roles for Testing

07/09/2020 - Setting up “Tracking Statuses” for best results!

Definitions
0:42 Tracking Status, Can Assemble, Can Package, Can Number, Can BOM, Can Cut List
2:00 Applies to Package, Applies to Assembly, Applies to Part
3:12 Office, Purchasing, Shop, Field Tracking Status Groups Processor Categorization
3:56 Description, Color, Warning, Delete

Relation Between Tracking Statuses and Column Settings Using Customer Success
4:35 Design - Top Tracking Status, post-publish
5:32 Modeled
5:51 Packaged
5:58 Spooled
6:05 Material Ordered
6:42 Can Number
7:53 Materials Ordered and Joint Complete
8:15 Place Holder Geometry + Warning
9:02 On Hold + Warning

Examples
9:34 Create New Tracking Status + Project Roles Access
10:55 Apply Tracking Status in Models Viewer
12:00 Tracking Status Display Modes
12:20 Prevent Actions based on Tracking Status settings
15:00 Placeholder and On Hold with Warnings
15:49 Spool Breaks
17:40 Revit Tracking Status on Import

07/02/2020 - STRATUS for the field user!

1:00 How to override your project role for testing.
1:50 Tracking Status of Packages and Assemblies - Display Modes
2:44 Gear Settings
3:00 Assembly Selection
3:22 Multiple Part Selection
4:00 Filters
4:48 Run a BOM Report
6:00 Part Properties and Part Templates
7:00 Shop Drawing Dimensions, Elevations, Tags, Spool Tags
7:34 Grid and Grid Offset Measurement Tools
10:06 Spool Tags
10:45 Where is spool in the model?
11:49 Assembly Properties QR Code to update status
13:02 Scan QR Code with a phone video

06/25/2020 - Ask The Experts!

2:00 Strongback rack support systems
3:00 Model worksets performance
4:00 Multi-trade Packaging/Spooling
12:00 sPoint for Revit (Hangers)
17:40 Master Report
19:30 Spool Checker Edited Length on Report
29:52 Weld Tracking and Editable Fields

06/11/2020 - Spooling and the Assembly Viewer

01:36 Package in Can Assemble Tracking Status
02:04 Create Assembly
07:00 Assemblies Viewer
07:50 QR Code Scan Options
08:25 Rename Assembly
08:40 Admin > Naming and Numbering (Naming Conventions)
08:10 Toggle Orientation
09:50 Tracking
11:45 Settings Gear
13:10 STRATUS Toolbar
13:20 Display Mode
13:41 Filters, Grid Offset Measurement, Display Grid
14:10 Admin > Item Numbering and Can Number Tracking Status
17:30 Admin > Naming and Numbering (Numbering Rules, Numbering Schemes)
18:50 Admin > View Styles
19:22 Admin > Project Roles
19:43 Tags and Notes
22:20 Dimensioning
23:20 Linear Placement Measurement Tool and Node Options
25:10 Spool Checker and Adjusted Cut Length
27:15 Parts Tab - Send to Tool
27:58 Parts Reports and Assembly Filter
29:39 STRATUS Sheet Tab

06/04/2020 – Fab Stickers! For more than just pipes!

00:48       ZPL Emulator, GTP STRATUS Workstation Installers, and Tools
02:05       Hanger Sticker Example
03:10       A Sticker is just a report printed on a sticker!
04:00       Create the Hanger Sticker Example Report
06:20       STRATUS.Part.Point.AFF Field
08:40       Labelary tool
09:34       Sticker fields must be a Report Field AND in the Label Template
10:36 ZPL Syntax
15:44 GTP STRATUS TigerStop Workstation – How to group by size of rod
17:36 Rod Cut Length Field

05/28/2020 – Advanced Filtering

02:00 Overview
03:00 Groupings
04:30 Filter Group Conditions and Choosing the Best Filter Property
11:00 Alias for Size
12:00 What Format Is Your Filter Property Stored In?
17:50 Can an Alias be used to combine fields between AutoCAD and Revit? Yes!
19:10 On the Filters page, can you specify the difference between the Grouping column and the Conditions?
21:30 The Grouping "order" does matter
22:45 Use Service Type, Service, and Source, and Product Description for ITM's
24:40 Project Browser Filters
28:30 Deliverable Definitions are based on Filters that automate fabrication package generation

05/21/2020 – Ask The Experts!

01:35 How to get Revit colors to display in STRATUS
02:51 How to Create a Master Report
06:25 How to Batch Spool
09:40 Best Way to Refresh Spool Sheet Iso View
13:09 How to use the Ignore Ancillaries Option
20:36 How to Manage Notes and Annotation Tags for an Assembly
25:37 How to Display BOM Length as 10'-0"
28:19 How to Work with Item Number Annotations
37:04 Can drops to Chillers, VAV boxes etc. be tracked?

05/14/2020 – Part Templates; What are they and how are they used?

1:00 Part Definition Definition Slides
3:00 Identify Template Name for a part
3:40 Review a Part Template
5:20 Configure Properties and Shared Properties
6:40 Visible and Order
9:00 Name and Display Name
10:40 Editable
11:55 Unit Label
12:25 Display Format and Storage Format
13:35 Item Number and Naming and Numbering Settings
16:20 Cut List Mappings
17:00 Consider For Cut Lists and Consider Fitting For Labels
18:10 Consider for Single-Axis Cut Lists
19:15 Consider for Multi-Axis Cut Lists
20:10 Threadolet, Weldolet, Saddle and Pipe Cuts

05/07/2020 – Hanger Prefabrication

1:45 Hanger Package
2:15 Filters for hangers
2:55 Naming and Numbering hangers based on filters
4:45 Numbering hangers in Hanger Package
5:25 Hanger Reports
6:30 Hanger Check Dimension Field
8:00 Ancillary Part Properties and Reports
13:30 ZPL Label with ancillary data
17:25 Revit Nested Families and the Build Assembly for Nested Family checkbox in Part Templates
22:30 Package BOM Report unchecking the ignore ancillaries override
23:40 Hanger Points export list using pass through tracking statuses (Ex. Release Trimble Points)

04/30/2020 – Using Fields in STRATUS

04/09/2020 - Ask The Experts!

04/02/2020 - Deliverables: Super Charge Your Packaging, Spooling, And Tooling

02/27/2020 - STRATUS Mechanical Implementation - The Value Of Accurate Data

Your model is a database and is only as good as the accuracy of the information
Two types of data inaccuracies

Content (Informational) Vs Dimensional
Both are (potentially)under your control

Content (informational)

What kind of content you have and who manages it is a critical factor in how you manage it

RFA and ITM
Building Data/Sysque Vs self-managed

Common issues

What is it? - Descriptions too generic or inaccurate
What size is it?
I can’t filter it!

Do I fix it using STRATUS or within my authoring software?

Conditioning data

Consistently inaccurate or all over the road?

Content (Dimensional)

Better detailing QC – Can’t hide behind fixing it at the end
Spool checker – when to use and why

Pre-Conditioning data

Custom Data Fields/Parameters

Report filters
Extra data

Implementation Webinars