Draw Offsets(s)

Owned by Matthew Tate
Last updated: Aug 13, 2019
1 min read


The GTP WireWorks Draw Offset tool is designed to allow the user to quickly draw an offset from a user-selected conduit.


Workflow

  1. Activate the command
  2. Select first conduit
  3. Input the offset direction and two of the following: Angle, Rise, Run, Length
  4. Hit enter or click OK



Offsets are drawn based off your input settings on the end of the conduit

© Copyright 2024 GTP Software, Inc. All rights reserved. | About | Contact