Top & Bottom Menus

Owned by Elijah Thompson (Deactivated)
Last updated: Aug 09, 2023
4 min read

Top Menu Buttons:

Size Range: This allows you to pick the size range of a part/pipe

Viewport: You can take pictures to upload to PDF reports

  1. If the new port is highlighted yellow then this indicates that changes have been made to the sketch since the last viewport has been taken. Update your viewports before exiting your sketch

  2. For more information on viewports, click here: View Port

2D View: Takes the user to a 2D view

 

Visibility Toggles: Toggles the visibility of length lines, IDs, sizes, and others

 

  • Length- The dimension of an item

    • Line- Pipe lengths

       

    • XYZ- Distance to an axis

       

    • Olets- Olet distance to the end of a pipe

       

    • Rulers- Created ruler dimensions

      • Ruler dimensions will appear red when locked

         

  • Size- The size of the pipe

 

  • ID- The moveable labels on items

    • Pipe- Pipe IDs

  • Fitting- Fitting IDs

  • Olet- Olet IDs

  • Elev- Elevation of horizontal pipes

  • Align- Helps align certain fittings

    • Eccentric- Allows eccentric reducers to be aligned to the top, right, bottom, or left

      • Tapping on the arrow will prompt the alignment to bring up all four arrows. Clicking on the alignment you would like will align the eccentric reducer to that side

 

 

  • Cycle- Allows fittings with more than 2 inlets/outlets to be toggled to where they attach the pipe

    • Tapping the cycle will flip the fitting to the next inlet/outlet

 

  • Flow- Will flip a fitting’s inlet/outlet

Undo & Redo: Undoes the most recent changes to the sketch

 

Sketch Name: Displays the sketch name. Clicking on it allows the user to change the name

Info dropdown: Displays info for the sketch such as area, order, date required, cost, and status

  • Area- Where is the sketch set to go in the field

  • Order- What order number is the sketch in

  • Date Required- Can be whatever date the user wishes to use:

    • Date required to be spooled

    • Date required in the field

  • Status- What is the status of the package

 

Trash: Erases everything in the sketch

 

Home: Takes user back to the home page

  • For more information on the home page, click here: App Home Page

 

Cart: Takes the user to the catalog page

  • For more information on the catalog page, click here: Catalogs Page

 

Service selector: This allows you to select a service that has been assigned to the project to draw in the sketch

  • Services are separated by DB

  • Only services from the same DB can be used for multiservice sketching

  • The letter beside the service indicates the ID on the pipe the service is from

  • Switching to a service in a different DB will delete the whole sketch

  • For more information about services, click here: Services Page

 

 

Bottom Menu:

3D joystick: The joystick will rotate the sketch in 3D around a central point. In 2D will flip to the next axis

 

Iso flip: Snaps it back to iso if not in standard iso or flips to another axis

  • Double-clicking will recenter the sketch

 

Zoom: This allows the user to zoom in/out of the sketch

 

Package Description: Allows notes to be attached to reports & sent to STRATUS