Stratus Changelog
The Stratus Changelog details the features and enhancements included in each release.
Links to the latest Stratus AddIn and other Stratus software is available on the Installation of GTP Software on Windows article which includes links to:
10 Feb 2026 - 7.6.1140
Installers:
Stratus Addin - Optional
Fixed Fixed an issue where Fish Mouth pipe cuts displayed incorrect cut information in the PSVR file.
Stratus Workstation - See the new Stratus Workstation Changelog
Website Changes:
update Updated Shift to prompt Package selection when scanning QR Codes for items (Package, Assembly, or Part) assigned to multiple Packages.
update Updated messaging modal to provide specific information explaining why item numbering cannot be edited for parts when the Numbering Scheme Rule Type is set to Authoring Software Is Right.
Fixed Fixed an issue where Quick Pass IP ranges containing spaces failed to save properly.
Fixed Fixed a Packages > Viewer > BOM issue where the Size column displayed duplicate inch marks in some cases.
Fixed Fixed an issue where the STRATUS.Part.Number property could be edited when Item Numbering rules should have prevented it.
05 Feb 2026 - 7.6.1139
Installers:
Stratus Addin - None
Stratus Workstation - See the new Stratus Workstation Changelog
Website Changes:
Fixed Fixed a dimension issue where after using the Place Angular Measurement tool and the page is refreshed, the dimension disappears.
Fixed Fixed an issue on the Packages > Items tab where the checkbox would deselect immediately after selecting an assembly in the Assemblies data table.
02 Feb 2026 - 7.6.1138
Installers:
Stratus Addin
Fixed Fixed an issue where Revit > Publish Setting > Sets were not select but displayed in the Stratus publish dialog.
Stratus Workstation - See the new Stratus Workstation Changelog
Website Changes:
Fixed Fixed a Packages Viewer issue where some users were getting an error when opening attachment markups or clicking on the CAD Sheet tab.
Fixed Fixed a Big Data sync issue where the Rebuild Data option failed due to unexpected or missing data.
Fixed Fixed a Packages > Parts table issue where parts from Package A also displayed in Package B when the parts shared the same family.
Fixed Fixed a Models > Viewer > Properties issue where the size value was not displayed at the beginning of the “HoleInfo” strings. The following properties now correctly display the size when Branch Diameter is set on the connected part:
STRATUS.Part.HoleInfo
STRATUS.Part.HoleInfoCCW
STRATUS.Part.HoleInfoType
21 Jan 2026 - 7.6.1133
Installers:
Stratus Addin - None
Stratus Workstation - See the new Stratus Workstation Changelog
Website Changes:
ADDED Added to the Lookup Table feature the ColumnLookup() function, which replaces manually maintained semicolon-separated lists with automatically synchronized dropdown options from centralized source tables.
Add or edit a Lookup Table.
Create a Field that references the Lookup Table, the column, and Is Editable
(e.g., ColumnLookup("ColumnLookup", "ShopCodes").Add the Field to a Report. The Lookup Table column data displays in an editable dropdown list.
Fixed Fixed a Stratus Sheets issue where for Field Orderz packages the Stratus Sheet would not initially load properly.
Fixed Fixed a Package Viewer issue where the default sub-tab selection (Items, BOM, Cut Lists, Stratus Sheet, Markups, Notes, Attachments, Tasks, Tracking, Properties) did not save.
21 Jan 2026 - 7.6.1131
Installers:
Stratus Addin - None
Stratus Workstation - See the new Stratus Workstation Changelog
Website Changes:
ADDED Added to Task Definitions the Apply Tracking Status to Part checkbox. When checked for Package/Assembly tasks (with "Apply Tracking Status to Package/Assembly" unchecked and Bypass Dialog checked), the new tracking status applies only to parts matching the assigned filter criteria upon task completion. Part filters also apply to optional Part-type label reports.
ADDED Added Include Ancillary Cut List Items option under Cut List Mappings in Part Templates for duct fabrication items. When set to Yes (default), both ancillaries and single axis cut list mappings coexist and generate cut list items. Available for Part Templates where Type = Autodesk.Revit.DB.FabricationPart or Autodesk.Fabrication.Item and Category contains "Duct" or "Hanger".
14 Jan 2026 - 7.6.1130
Installers:
Stratus Addin - None
Stratus Workstation - None
Website Changes:
ADDED Added new features to Shift (videos below) which can be enabled under Settings.
Shift Types: Adding Shift Types as an additional attribution to checked-in and package session logs. This enables concepts like day shift, night shift, regular time, overtime, etc.
Shift Tasks: Shift Tasks brings the ability to apply task definitions to packages that contain related part, assembly, and package tasks.
Shift Time Entry Forms: Adding a time entry form in Shift in order to allow a different input mechanism. This form will also be used to edit existing session log entries.
Shift Tracking Status Stop Sessions: Shift Tracking Status Stop Sessions automatically ends time tracking when a package's status changes to one that isn't configured for Shift tracking.
Shift QR Check-in/out Only: The Shift QR Check-in/out Only requires workers to scan their worker badge QR Code to Check In and Check Out.
Fixed Fixed a Part Property Names (Include and Exclude) Settings issue that prevented updates from being saved under Admin > Company > Settings > AutoCAD, Revit, CAMduct, and ESTmep.
Fixed Fixed a Packages BOM issue where the BOM Description was not rendering correctly. The text now displays fully and wraps as expected, with no characters missing.
Fixed Fixed an issue in the Assembly Viewer where updating the Tracking Status of nested Family parts failed to update correctly. All nested Family parts now update as expected.
Fixed Fixed a Packages Dashboard issue where after applying a filter the total dashboard value did not display. For a sum, both the total dashboard value and the total visible value should display separated by a slash (see screenshot).
08 Jan 2026 - 7.6.1129
Installers:
Stratus Addin - None
Stratus Workstation - None
Website Changes:
ADDED Added the Shift Session Open API Post call (/v1/timesession/set-locked) for setting a synchronization lock state on session log records, which prevents editing once records are synced with an ERP or accounting system for example.
Fixed Fixed an Autodesk linked reference file limit issue so now Spool dwg files are ignored and not considered linked references during publish.
Fixed Fixed a Field Orderz issue where Item descriptions for the "Source" property converted to lowercase during publish to Stratus.
Fixed Fixed an issue with the Replace() and Split() functions used in reports.
04 Jan 2026 - 7.6.1127
Installers:
Stratus Addin - None
Stratus Workstation - None
Website Changes:
ADDED Added bulk edit capability to Package Dashboard reports through select checkboxes that allow users to modify dashboard values across multiple packages simultaneously.
ADDED Added a new Project Role for Packages Dashboard Reports under Reports > [Default Report], which will be enabled by default for all Project Roles. When unchecked, the Default Stratus out-of-the-box report will not be available.
update Updated the Tables feature to includes a Clone CSV data to project tables when first created checkbox that impacts how tables are copied and created at the project level Project Tables (Admin). In summary when checked, headers and row data values from the company level will be copied into newly created Project Tables at the project level to ensure consistency and reduces manual data entry errors during project setup.
Fixed Fixed an issue where Assembly data aggregation using STRATUS.Assembly.xxxx fields was not working on Package Dashboard reports.
Fixed Fixed an issue where background reference parts were incorrectly updated when using the “Apply Tracking Status to Visible” under Actions > Tracking in the viewer to change tracking status while "Show Backgrounds" was enabled in Package Viewer settings, as shown in the screenshot below.
© Copyright 2025 GTP Software, Inc All rights reserved. | About | Contact