v6.3.2 Updates (11/8/23 - 12/16/23)
- 1 v6.3.2 Minor Software Updates (11/8/23 - 1/18/23)
- 1.1 11/09/23 - Fixed a Grouping Issue
- 1.2 11/16/23 - Fixed Issue Adding Project.Name and Project.Number to a STRATUS Sheet
- 1.3 11/16/23 - Fixed STRATUS Sheet Issue Caused by Field Name Space
- 1.4 11/16/23 - Fixed Part Template Display Name Override Issue
- 1.5 11/16/23 - Fixed Assemblies Dashboard Multiple Entry Selection Change Status Issue
- 1.6 11/16/23 - Fixed Packages Cut Lists Multiple Entry Selection Delete Issue
- 1.7 11/16/23 - Fixed an Issue Reporting Assemblies in a Container
- 1.8 11/16/23 - Fixed Page Refresh Issue on Assembly Viewer > STRATUS Sheet
- 1.9 11/16/23 - Fixed Cut List Mapping Issue
- 1.10 11/16/23 - Updated GTP QuickPass Login
- 1.11 11/21/23 - Updated STRATUS Workstation Filters with All Checkbox
- 1.12 11/21/23 - Fixed Data Display for New Packages
- 1.13 11/21/23 - Updated Properties Hole Tolerance to 1/2”
- 1.14 11/21/23 - Fixed Part Templates Drop-down Issue
- 1.15 11/21/23 - Added to Containers Dashboard Filter by Division
- 1.16 11/27/23 - Updated Storage and Display Format Settings
- 1.17 11/27/23 - Fixed Editable Property Displaying EMPTY_STRING
- 1.18 11/27/23 - Fixed Issue Renaming Material Alias
- 1.19 11/27/23 - Improved Performance of Admin Fields
- 1.20 11/27/23 - Fixed a Editable Date Field Display Issue
- 1.21 11/27/23 - Updated Editable Field Behavior
- 1.22 11/27/23 - Fixed Field Reference Template Issue
- 1.23 12/01/23 - Fixed a Publish Issue
- 1.24 12/07/23 - Fixed a Report Display Issue for 'Merge Like Values'
- 1.25 12/07/23 - Fixed an Assemblies Dashboard Part Display Issue
- 1.26 12/07/23 - Fixed a Package Category Advanced Estimating Issue
- 1.27 12/07/23 - Fixed OpenAPI Issue Returning requiredDT
- 1.28 12/11/23 - Fixed ‘Omit page if Report(s)’ Issue
v6.3.2 Minor Software Updates (11/8/23 - 1/18/23)
11/09/23 - Fixed a Grouping Issue
Fixed an issue where reports did not display Groupings when configured with aliases and filters.
11/16/23 - Fixed Issue Adding Project.Name and Project.Number to a STRATUS Sheet
Fixed an issue where the STRATUS.Project.Name and STRATUS.Project.Number was not displaying on a STRATUS Sheet.
11/16/23 - Fixed STRATUS Sheet Issue Caused by Field Name Space
Fixed an issue displaying a STRATUS Sheet that was caused by a space in a STRATUS.Field name. The fix is to trim spaces at the start or end of Field names under Admin > Company > Fields.
11/16/23 - Fixed Part Template Display Name Override Issue
Fixed an issue where entering a Display Name Override under Admin > Company > Part Templates was not applied in the Properties tool in the viewers.
11/16/23 - Fixed Assemblies Dashboard Multiple Entry Selection Change Status Issue
Fixed an issue on the Assemblies Dashboard where after selecting multiple entries, then changing the Status, only the top row was changed. With this change, the Status of all selected rows will change.
11/16/23 - Fixed Packages Cut Lists Multiple Entry Selection Delete Issue
Fixed an issue on the Packages Cut Lists where after selecting multiple entries, then clicking Delete button, only the top row was deleted. With this change, all selected rows will be deleted.
11/16/23 - Fixed an Issue Reporting Assemblies in a Container
When using custom reports with STRATUS.Assembly.Container, STRATUS.Part.Container, or STRATUS.Package.Container, only Containers holding the parts, assembly or package will be shown on each respective dashboard or viewer. Only Assemblies added to a Container will be listed in the Assembly Report on Packages Viewer.
11/16/23 - Fixed Page Refresh Issue on Assembly Viewer > STRATUS Sheet
Fixed an issue on the Assemblies > Viewer > STRATUS Sheet where once a STRATUS Sheet had loaded for Assembly A, switching to Assembly B using the Assembly drop-down did not load Assembly B content into the STRATUS Sheet without refreshing the page.
11/16/23 - Fixed Cut List Mapping Issue
Under Admin > Company > Part Templates > Template > Cut List Mappings, fixed an issue where STRATUS.Field.* mappings were not saved.
11/16/23 - Updated GTP QuickPass Login
Updated the GTP QuickPass QR Code scan login process to disable users whose IP Address is not in a defined range and sends an email to all Company Administrators.
11/21/23 - Updated STRATUS Workstation Filters with All Checkbox
Updated Filters and Grouping option list in STRATUS Workstation to include an All checkbox (Model, Package, Spool / Assembly, Area). Note: Long lists of assemblies or packages can take up to a minute to check or uncheck All items.
Checked - When checked, all items will be checked and All will display in the drop-down (Ex. All Packages).
Unchecked - When unchecked all items will be unchecked and the drop-down will be blank.
Mix Checked/Unchecked - When individual items are checked and other items are unchecked, the selected item names will display in the drop-down (Ex. Model reads GTP - ITM - Revit - Mechanical) as to fill the space. The space is not designed to display all checked, just click the drop-down to view.
11/21/23 - Fixed Data Display for New Packages
Fixed an issue when creating a new package where editable fields configured for the package Category (Ex. Package Reporting and Advanced Estimating) were not editable or displaying values from parts selected in the viewer. See the Package Reporting and Estimating and Advanced Estimating articles for more information.
11/21/23 - Updated Properties Hole Tolerance to 1/2”
Previously, when a hole was 1/2” or less from centerline, the following STRATUS.Part.HoleInfo* properties would not display data. With this fix the hole tolerance has been increased to 1/2” from centerline. Data will display for fabrication parts and part families configured correctly as taps for pipe.
STRATUS.Part.HoleInfo
STRATUS.Part.HoleInfoCCW
11/21/23 - Fixed Part Templates Drop-down Issue
Fixed an issue under Admin > Company > Part Templates where Display Format and Storage Format did not provide any drop-down options.
11/21/23 - Added to Containers Dashboard Filter by Division
Added to Containers > Dashboard the ability to filter by Division.
11/27/23 - Updated Storage and Display Format Settings
Updated publish logic to prevent changes to existing Properties under Admin > Company > Part Templates so that STRATUS is the source of truth for Storage and Display Format Settings. With this update, only new (missing) Properties will be added to existing part templates. This update also fixes issues with Length Property units.
11/27/23 - Fixed Editable Property Displaying EMPTY_STRING
Fixed an issue with Reports that included an editable Report Field and Merge Like Values was set to yes, the parent and children displayed EMPTY_STRING.
With this fix, when there is no value, the value should display as Empty.
11/27/23 - Fixed Issue Renaming Material Alias
Fixed an issue under Admin > Company > Materials > Material Fields where renaming an existing Material Alias also renamed another Material Alias within the same Material.
11/27/23 - Improved Performance of Admin Fields
Improved the performance of loading the Admin > Company > Fields page by only displaying the Expression as a hyperlink rather than formatted syntax. Note: Leaving the References Load All? checkbox unchecked will also improve performance.
11/27/23 - Fixed a Editable Date Field Display Issue
Fixed a report issue when the report was zoomed (Ex. 150%) and after clicking an editable Date Field it became unusable.
Before:
After:
11/27/23 - Updated Editable Field Behavior
The table below describes how editable fields work in the Properties Panel and in the report table.
Property is on the | Property is on the Part | Field Behavior | Example |
---|---|---|---|
Yes (Editable) | Yes | Show Empty underline for edit and saves |
|
Yes (Editable) | No | Property shows as editable. However, when attempting to place a value on the property, an Unable to Save Value message will appear to inform the user the value will not be saved as the property does not exist on the part. |
|
Yes (Not Editable) | Yes | Shows Read-only value |
|
Yes (Not Editable) | No | Nothing (Blank) |
|
No | Yes | Shows Read-only value |
|
No | No | Nothing (Blank) |
|
11/27/23 - Fixed Field Reference Template Issue
Fixed a Field Expression issue where Field A referenced Field B and Field A was added to a Template. When the template was run in a report, the data from Field B was not correctly passed to Field A.
12/01/23 - Fixed a Publish Issue
All models with ancillaries have been publishing with incorrect data since 11/7/23. This issue has been fixed.
12/07/23 - Fixed a Report Display Issue for 'Merge Like Values'
Fixed a Report issue where a Report Field did not display the Length for the parent or child parts when Merge Like Values = Yes.
12/07/23 - Fixed an Assemblies Dashboard Part Display Issue
Fixed an issue on the Assemblies > Dashboard where an assembly could not be expanded to view its parts in the selected Part Report.
12/07/23 - Fixed a Package Category Advanced Estimating Issue
Fixed an issue where under Admin > Company > Package Categories > Advanced Estimating, fields were entered under the User Data columns, but did not display data when a new Package was created using the Package Category. In this example, the Package Category has User Data 1 set to STRATUS.Field.CSG _ MEP _ Dashboard _ Weight which now displays data in the new Package creation dialog.
12/07/23 - Fixed OpenAPI Issue Returning requiredDT
Fixed an OpenAPI issue where the following endpoints did not return the requiredDT when an include argument was used.
/v1/package
/v1/package/{id}
In addition to the requiredDT, the following dates will also return a valid when used with the include arguement:
installedDT
officeStartDT
purchasingStartDT
startDT
12/11/23 - Fixed ‘Omit page if Report(s)’ Issue
Fixed an issue with a report generated using a Template included Page 2 or higher, where if the Omit page if Report(s) was checked and the Report Title checkbox was also checked, the report would generate a follow-up page with the Report Title on Page 2 even if there was not any overflow data. With this fix, Page 2 will not display if there is no overflow data.
© Copyright 2022 GTP Services, LLC All rights reserved. | About | Contact