02/24/2022 - v5.0.12.6

Added STRATUS.Part Properties for Cut Lists

Added the following STRATUS.Part properties that can be used in reports to determine if a part was cut, when it was cut and how long it was. where Item Type = Part.

• STRATUS.Part.IsCut (Integer) - 0 indicates the part has not been cut; 1 indicates the part has been cut.

• STRATUS.Part.CutDT (DateTime) - The part’s most recent cut date time.

• STRATUS.Part.CutDTHistory (String) - Semi-colon delimited list of cut dates times.

• STRATUS.Part.CutLengthHistory (String) - Semi-colon delimited list of actual cut lengths in decimal, using model units (Ex. Revit = feet; AutoCAD = inches).
  Note: If a cut list is deleted, it will not appear in the Cut Length History. Therefore, the only way to see items having multiple cut date times is if the part is in two different packages (of different categories) and a cut in each one.

  Open

  

Added to Filters that Dimensions Do Not Display When Connected Parts Filtered Out

Added to Packages and Assemblies Viewers, when a dimension is drawn between 2 parts, if one part is included in a filter and the other part is not in the same filter, when the filter is turned on the dimension will no longer display. In other words, dimensions will only display when the dimensioned parts are in view. For example:

1. Filter Off.

   Open

   

    

2. Filter On.

Improved the Tablet Pinch Zoom In/Out Accuracy

Improved the accuracy of tablet zooming using 2-fingers to pinch and zoom so that zooming is approximately the midpoint between where the two fingers were initially placed.

Fixed an Issue Camera Scanning in Containers

Fixed an issue under Containers using the camera scanning options to a) scan a Container QR code label to display the container and b) camera scanning a part, assembly, or package QR code into a container.

Fixed a STRATUS Sheet Font Alignment Issue

Fixed an issue on the STRATUS Sheet where under Admin > Company > Templates, the Font Alignment for a report field was set to Centered or Right aligned but the STRATUS Sheet display it as Left aligned.