01/14/2021 - v3.5.12.26

Added STRATUS.Part.BIMAbbreviation to Part Properties

Added STRATUS.Part.BIMAbbreviation to Part Properties. For example:

1. The BIM Area Abbreviation is set under Admin > Projects Areas. See the Areas (Admin) article for more information.

   Open

   

    

2. The Abbreviation will display in Properties under STRATUS.Part.BIMAbbreviation.

   Open

   

Fixed an Issue with Actual Hours on the Assemblies Dashboard

Fixed an issue with Actual Hours on the Assemblies Dashboard where after entering hours in the Assemblies Viewer, the hours did not total on the Assemblies Dashboard. Here’s how Actual Hours should work:

1. In the Assemblies Viewer, enter Hours in Tracking and click Apply. The tracking Status and other information can also be changed as needed. In the example below, 8 was entered into the Hours field.

    

2. On the Assemblies Dashboard, 8 displays in the Actual Hours column for the assembly.

    

3. Actual Hours will total any new hours applied to the assembly. In the Assemblies Viewer, 3 more Hours were entered and Applied.

    

4. On the Assemblies Dashboard, 3 hours were added to the 8 hours for a total of 11 hours displayed in the Actual Hours column for the assembly. Note: Negative hours can be applied in the previous step and they will be subtracted from the total.

Fixed a Naming Issue with Fields

Fixed an issue by preventing the use of square brackets [] in Field names under Admin > Company > Fields.

Fixed a STRATUS Sheet Template Issue with Stratus.Package.NumAssemblies

Fixed a STRATUS Sheet Template issue with where Stratus.Package.NumAssemblies did not display the total number of assemblies in the package.