02/10/2021 - v3.5.16.31

Owned by Conk Buckley
Last updated: Feb 10, 2021
5 min read

02/10/2021 - v3.5.16.31

Added BOM (default line item mapping) to Settings

The Admin > Company > Settings page has a new expand/collapse look and a new setting category, BOM (default line item mapping). The BOM (default line item mapping) is a new feature that enables an Admin to set a default BOM Mappings for ALL Part Templates that exactly match the default line item mapping. One scenario for using the BOM (default line item mapping) setting is to include a consistent description based on fields for all Part Template > BOM Mapping.

Here’s how the BOM (default line item mapping) setting works:

  1. All companies have a BOM (default line item mapping) setting. Note that all properties are set to Default, None, or 1. Default indicates that the property does not have an override.

     

  2. Review some of your Part Template > BOM Mappings and determine if the mappings are exactly the same as the default line item mapping in the screenshot above.

    1. The Part Templates > BOM Mapping below exactly matches the BOM (default line item mapping) setting above. As a result, if the BOM (default line item mapping) setting above is changed, the BOM Mapping below will also change.

       

    2. The BOM Mapping below does not match the BOM (default line item mapping) setting above. As a result, if the BOM (default line item mapping) setting above is changed, the BOM Mapping below will not change.

       

    3. The BOM (default line item mapping) setting only applies to the first mapping row of the Part Template > BOM Mapping. In the example below, even though row 2 exactly matches the BOM (default line item mapping) settings in this example, row 1 does not match. As a result, the BOM (default line item mapping) setting would not apply to this Part Template > BOM Mapping. If row 1 and row 2 were switched, then the BOM (default line item mapping) setting would apply to this Part Template > BOM Mapping.

       

  3. If you want a Part Template > BOM Mapping to be synced with the BOM (default line item mapping) setting, you would need to change the Part Template > BOM Mapping to match the BOM (default line item mapping) setting. Then, moving forward, any changes made to the BOM (default line item mapping) setting would apply to the Part Template > BOM Mapping.

  4. In this example, a Manual Override for the BOM (default line item mapping) Description setting will be set Test 45.

    1. As soon as the save check is clicked, the change will be applied to all qualifying Part Template > BOM Mappings in your company. There is no prompt to confirm this change.

       

    2. The process may take up to a minute.

       

    3. Once done, the BOM (default line item mapping) setting will be changed to the following:

       

    4. Refresh the Part Templates page and check the Part Template > BOM Mapping that exactly matched the BOM (default line item mapping) before the change to Test 45 was made now displays Test 45 in the Description.

       

    5. Refresh the Part Templates page and check the Part Template > BOM Mapping that did not match the BOM (default line item mapping) before the change to Test 45 was made does not display Test 45 in the Description. The Material property is still set and the Description property is still Default.

       

  5. Based on this example, if you wanted to make another change to the BOM (default line item mapping) setting, any BOM Mapping that exactly matched the following would also be changed.

Updated BOM Mapping Labels

While no functionality has changed, the BOM Mapping labels have been changed as follows:

Packages > Details > BOM tab

Company BOM Line Item Mappings

Click the gear in the BOM Mappings column (above) associated with a line item and the Company BOM Line Item Mappings dialog will display.

  • The selected Part Template Name will display.

  • For Line Item Mappings, changed the label from ‘No Overrides’ to ‘Default’.

  • Making an edit to this mapping will immediately impact the Part Template company-wide.

Added Project Fields to Reports

Added to Admin > Company > Templates, Project fields like Project Name, Number, Address, Shipping Address, and more to the Templates for Reports below. Note: STRATUS.Project.ShippingAddress.* fields use the "Default" shipping address specified under Admin > Project > Shipping Addresses.

  • Container Details

  • BOM

  • Invoice

  • Purchasing

Fixed a Revit Assembly Conflict Issue when Prompt User selected

Fixed a Revit Assembly Conflict issue when Prompt User was configured. When moving a part from one assembly to another in STRATUS, then importing it back into Revit, the user was prompted correctly, however, when STRATUS is right was selected in the prompt, the parts did not resolve correctly.

 

 





© Copyright 2022 GTP Services, LLC All rights reserved. | About | Contact