1 01/20/2021 - v3.5.13.11

01/20/2021 - v3.5.13.11

Added back-off routine for roll cutter TigerStops operating in Automatic mode

Added back-off routine for roll cutter TigerStops operating in Automatic mode.

Updated the Import Process for Revit

Updated the Import process for Revit models related to the Assembly Conflict Resolution settings under Admin > Company > Settings > Specific to Revit as follows:

STRATUS is always right - When STRATUS is always right is selected, any assemblies created in Revit that conflict with an assembly in STRATUS will be considered “invalid” and will not be published to STRATUS.
Revit is always right - When Revit is always right is selected, any assemblies created in STRATUS that conflict with an assembly in Revit will be considered “invalid” and will be deleted on import. Previously, after a model import, an assembly created in STRATUS that conflicted with an assembly created in Revit would not be deleted until after the next model publish which caused confusion.
Prompt User - When Prompt User is selected, the behavior will follow the selected rule above at the time of the prompt.

Updated handling of Revit errors

Updated the handling of Revit errors when Fabrication parts are grouped and copied. A new dialog box will display if the user cancels the import:

Updated the Assembly Types in the Assemblies Viewer and Assemblies Dashboard

Updated the Assembly Types in the Assemblies Viewer drop-down selector to the following:

Assembly = CADmep Spool, Revit Assembly, Revit Parameter-Based Assembly
Hanger = HangerWorks Hanger (Requires set up under Admin > Company > Settings > Specific to Revit)
Family = Revit Nested Family (Requires set up under Admin > Company > Settings > Specific to Revit)
Conduit = BendWorks Conduit (Requires set up under Admin > Company > Settings > Specific to Revit)

Updated the Assemblies Dashboard Types to reflect the change above.

Fixed the Add Projects from BIM 360 Docs Feature

On the Admin > Company > Projects page, the Refresh Projects from BIM 360 button name has changed to Add Projects from BIM 360 Docs. The Add Projects from BIM 360 Docs button only adds new projects, which is much faster for companies with hundreds of projects. In addition, for each project row, a Refresh button has been added that provides the ability to update the STRATUS information from BIM 360 for the selected project.

Fixed Publish Issue with Slip and Drive Connectors

Fixed a publish issue that resulted in slip and drive connectors being counted twice for quantities.