02/03/2022 - v5.0.9.10

Owned by Conk Buckley
Last updated: Feb 04, 2022
7 min read

02/03/2022 - v5.0.9.10

Added Viewer Search for Parts, Assemblies, and Packages

Add to the Viewers (Models, Packages, and Assemblies) the ability to search for parts, assemblies, and packages using various properties.

Settings

  1. Check the Settings to be used for the search. Note: The page does not need to be refreshed for the settings to be changed; Settings are sticky and will be retained from one viewer to the next and from one model to the next.

     

    1. Match On - Note: The properties searched may depend on object type (Package, Assembly, or Part) as noted below.

      1. All - Each Match On checkbox will be checked.

      2. Cad ID

        1. Package - None

        2. Assembly - STRATUS.Part.AssemblyCadId

        3. Part - STRATUS.Part.CadId

      3. Description

        1. Package - Order(Package).Description

        2. Assembly - None

        3. Part - STRATUS.Part.Description

      4. Element ID

        1. Package - None

        2. Assembly - None

        3. Part - ElementId in Revit models

      5. Name

        1. Package - STRATUS.Package.Name

        2. Assembly - STRATUS.Part.AssemblyNamee

        3. Part - None

      6. Number

        1. Package - None

        2. Assembly - None

        3. Part - Number in the CinxProperties (I believe it will be listed under Properties as Number), if it exists

      7. QR URL

        1. Package - STRATUS.Part.PackageQRCode

        2. Assembly - STRATUS.Part.AssemblyQRCode

        3. Part - STRATUS.Part.QRCode

      8. Web ID

        1. Package - STRATUS.Part.WebId of parts in the package

        2. Assembly - STRATUS.Part.WebId of parts in the Assembly

        3. Part - STRATUS.Part.WebId

    2. Settings:

      1. Replace Selection - When clicking Item A in the search results, Item A will highlight both in the viewer and in the search results. When Item B is clicked in the search results, Item B will be highlighted, but Item A will no longer be highlighted. Selecting Item B replaces Item A. For example, assembly DMV-ROOF-0001 was selected, but then assembly DMV-ROOF-0002 was selected and is now highlighted in the viewer.

         

      2. Keep Open After Selecting - When clicking in the search results, Item A will highlight both in the viewer and in the search results. When Item B is clicked in the search results, both Item A and Item B will be highlighted. For example, assembly DMV-ROOF-0001 was selected and now assembly DMV-ROOF-0002 has been selected and both are highlighted in the viewer.

Search

Search criteria can be entered using any of the following three methods:

  1. Type text into the text box.

    1. For example, enter search characters (Ex. H). As characters are entered matching Packages, Assemblies, and Parts will display in the list.

       

  2. Scan a QR Code using a handheld scanner. Note: The QR URL settings must be checked under Match On.

    1. Before scanning, the Viewer Search page must be the active page (Ex. the last mouse click must be on the page).

      1. (Optional) - The Scan QR code using handheld scanner button does not have to be clicked to scan a QR code. The purpose of this button is to remind users that a handheld scanner can be used to enter a QR code URL. If the button is clicked the following message will display.

         

    2. Use the handheld scanner to scan the QR code.

    3. The QR code will display in the search text and in the search results.



  3. Scan a QR Code using a tablet camera. Note: The QR URL settings must be checked under Match On.

    1. Click the Scan a QR Code using a tablet camera button. The Scan QR Code with Camera or Reader dialog will display where the camera will be selected.

    2. Point the camera to the QR code until the Scan Successful popup message displays in the bottom left corner.

    3. The QR code will display in the search text and in the search results.

Working with Search Results

After search results display:

  1. Expand/Collapse View Matches

    1. Items under Packages, Assemblies, and Parts can be expanded by clicking the View # Matches link (Ex. View 7 Matches).

       

    2. Click the Collapse button ( left of the Assemblies heading) to return to displaying the list Packages, Assemblies, and Parts subset.

       

  2. Zoom on selection(s)

    1. Select one or more items in the search results.

    2. Click the Zoom button to soom in on the selected Packages, Assemblies, and Parts in the viewer. Zoom results depend on where these items are located in the model.

       

  3. Search Results Outside the Current Packages / Assemblies Viewer - Since the search searches the model, parts, assemblies, and packages outside the current Packages or Assemblies Viewer will display in the search results annotated with an icon to distinguish it in the list.

    1. Currently, Package 123-FP-ROOF-0003 is open in the viewer.

       

    2. In this example, the search for 38358-FP-0003 is a different package name.

       

    3. Click package 38358-FP-0003 in the search results and it will display highlighted in the current viewer. This shows package 38358-FP-0003 in relation to the currently opened package.

       

    4. Click anywhere else in the model or unselect package 38358-FP-0003 and it will no longer display.

Added Package Number Before Name in Packages > Schedule

Added to the Packages > Schedule, the Package Number precedes the Package Name. The list of packages will sort by the Package Number.

Added BIMAbbreviation Property

The STRATUS.Package.BIMAbbreviation property can be added to:

  • Filters

  • Fields

  • Templates Report Field where Template Type is Package Details

  • Report where Item Type is Package

Note: The BIM Area value that populates the STRATUS.Package.BIMAbbreviation property is set in the following locations:

  • In the Package create dialog

     

  • Under the Package’s > Properties tab

Fixed a Packages > Status Board Issue

Fixed a Packages > Status Board issue where column headers did not align with the column data (below is an example).

Fixed a Package ZPL Report Issue

Fixed a Packages > Attachments issue where a ZPL attachment on a package that contained no parts or assemblies did not generate a ZPL label.

To Print the ZPL Label:

  1. Create the report attachment by clicking the Create button.

  2. Click the report to open it. The zpl code will display. Click the Print button to print the label.

Fixed a Search Issue on Assemblies > Dashboard

Fixed a search issue on Assemblies > Dashboard where entering a search in the Search textbox that includes an assembly ID or a date should no longer filter assemblies.

Fixed an Issue Creating an Alias that Contains & or # Characters

Fixed an issue creating an Alias that contains & or # characters.

Fixed a Report Issue Displaying STRATUS.Project.A360BusinessUnit

Fixed a report issue where the STRATUS.Project.A360BusinessUnit property did not display in the report. Note: This property is updated in STRATUS under Admin > Company Projects where the field synchronizes BIM 360 data using the Add Projects from BIM 360 or the Refresh (per project) button.

Fixed an Issue Editing Company BOM Line Item Mappings

Fixed an issue editing Company BOM Line Item Mappings when the Part Template included a # character in the name. In this example:

  1. Click the BOM Mappings button.

     

  2. The Company BOM Line Item Mappings displays. In this case, the Part Template Name included a # character. As a result, only STRATUS.* properties displayed in the Properties Fields drop-down list (Ex. Area would not have been an option).

Fixed a Company Role Issue

Fixed an issue under Admin > Company > Company Roles where a role was set to Notes and received both Admin > Company and Admin > Project permissions.

In this case, users assigned to this Company Role only need to have access to Admin > Company.

Fixed a Project Roles Issue

Fixed an issue where changing the category of a company filter that was turned on in a project role would remove the user's ability to control the visibility of those filters in the project roles.

Fixed an Assembly Numbering Incrementor Issue

Fixed an assembly numbering issue where the incrementor did not start at 01 based on a Field Expression.

Fixed a Packages > Properties Issue Saving the Package

Fixed a Packages > Properties issue when one of the Custom Fields was a date field, the package would not save and would result in the following error:

Fixed an Assemblies > Viewer Spool Checker Issue

Fixed an Assemblies > Viewer Spool Checker issue where the Spool Checker dialog did not display parts for a specific Company/Project.

 

 

© Copyright 2022 GTP Services, LLC All rights reserved. | About | Contact